Bosch Appliances 3922 988 43318 manual Menu a. Select Display Programming Language, Procedure

Digital Congress Network Installation and Operating Manual Chapter 11 - System Set-up and Operation en 11-22

MENUS

Menu a. SELECT DISPLAY PROGRAMMING LANGUAGE

To set the required language for display when programming the desk.The language set, for all interpreter desks installed in the system. If a language is not set, the desk will revert to its default [ENGLISH].

1.Select Menu a, ‘Select user Language’ menu as described in step 2 (Programming procedures). The following Menu should be displayed:

Select user language: <ENGLISH> FRANCAIS

DEUTCH ITALIANO ESPANOL NEDERLANDS a

abc

A B

Engaged

2.Rotate the ‘Relay select’ knob to scroll and select the required user language as described in Programming procedures Step 3.

3.To enter the selected language press the ‘Floor’. Refer to step 4.

Select user language: ENGLISH FRANCAIS

DEUTCH ITALIANO ESPANOL [NEDERLANDS] a

Menu b. SELECT BOOTH NUMBER

To assign the interpreter desk to a specific booth. Each interpreter desk installed in the system needs to be programmed individually.

Procedure:

Select Menu b, ‘Select booth number’ as described in step 2 (Programming procedures). The following Menu is displayed:

Select booth number:

<1> 2 3 4 5 6 7 8 9 10 11 12 13 14 15 b

abc

A B

Engaged

1.Rotate the ‘Relay select’ knob to scroll and select the required booth number as described in Programming procedures Step 3.

2.Press the ‘Floor’ key to enter the required booth number. Refer to step 4.

NOTE: The booth number selected can be different from the channel number.

abc

A B

Engaged

Bosch Security Systems 04-2003 3922 988 43318 en Programming the Interpreter desk