Bosch Appliances 3922 988 43318 manual To set system default Language

Digital Congress Network Installation and Operating Manual Chapter 11 - System Set-up and Operation en 11-4

When the selected units <RETURN> softkey has been pressed the CCU reverts back into the congress operational mode. To access the settings of the Maintenance menu on another unit, the ‘Maintenance Mode’ should be started again.

The displays below shows the units LC-display once the CCU has been entered into the ‘Maintenance Menu’.

11.4.1 To set system default LANGUAGE

Display language is for all units with an LC-display

4.To select and confirm the default language press the <ENTER> key when the required language is selected. Confirmation shows the default language enclosed in square brackets i.e.

[LANGUAGE].

5.The changed default language takes effect when the <ENTER> key is pressed.

[DEUTSCH]
<	>	ENTER	RETURN

1.Press the key located under the display text <LANGUAGE.>.

The current system language is	LANGUAGE IC OPER	RETURN
displayed between square brack-
ets [ ] .

NOTE: When installing DCN software, 6 languages are available for selection. These languages can be selected in the ‘MAINT. menu.

6. Press the <RETURN> key to return to the Maintenance Menu.

11.4.2 To set system INTERCOM OPERATOR POSITION

To set the default position for the system “Intercom Operator” proceed as follows::

2.To select another language press keys < to show the previous language and press the key > to show the next available lan- guage.

[ENGLISH]
<	>	ENTER	RETURN

1.Press the key located under the display text <IC OPER> to assign this unit as the ‘Intercom Operators’ position. When set ensure that the unit is equipped with a hand-set.

LANGUAGE IC OPER RETURN

NOTE: Once the ‘Intercom operators’ position has been set, no further indication is given

3.The selected language is shown between arrowed brackets i.e.

< >.

<DEUTSCH>
<	>	ENTER	RETURN

2.The default system intercom operators position will only take effect when the CCU reverts back to the congress operational mode.

Bosch Security Systems 04-2003 3922 988 43318 en Maintenance Menu