Bosch Appliances 3922 988 43318 manual PC Network System, Ethernet requirements, Client PC

Digital Congress Network Installation and Operating Manual Chapter 10 - Installation Techniques en 10-14

10.7.1 PC Network System

In installations where more than one PC operator control position is required, an additional PC can be connected via a ‘Peer-to-Peer’ Network, using a separate cable. PC’s connected in this method both require an Ethernet card installed in the computer with ‘Microsoft operating systems: Windows® 95, 98 2000, NT 4.0 or XP Professional. See also Chapter 5.. DCN Control Using Personal Computers

NOTE: Information is available on request concerning ‘Microsoft® Windows® and for using the Ethernet card .

FIG 10-19shows a typical configuration with an additional PC installed.

LBB 3500/15 or LBB 3500/35

Port 1		Rec.	Line	Trunk
	In		In
Port 2	Out		Out	115V-T4A 230V -T2A
			Symmetrical

PCF ≤ 180

Ethernet requirements

•Ethernet card (3Com recommended)

These cards have to be installed on each PC on a free interrupt e.g 10.

•‘Microsoft Windows® 95, 98, NT 4.0, 2000 or XP Professional.

•Connection between a server and a client PC:

-UTP cable or

-50 Ohm coax cable with:

-Two 50 Ohm T-pieces

-Two 50 Ohm terminating plugs

NOTE: The DCN software needed for this function must be version 6.0 or higher.

CLIENT PC

Ethernet

Card

LBB 3508/00

SERVER PC

Ethernet link

LBB 4116/xx

PC Network Card

LBB 3510/00

LBB 4114/00

Ethernet

Card

Software requirements on the PC’s

Server PC:

•LBB 3590 Start-up

•LBB 3585 System Installation

•One or more software application modules to control the required functions

Client PC:

•LBB 3590 Start-up

•One or more software application modules to control the required functions

Audio monitoring on the client PC

If the audio monitoring function is also required on the slave PC, a language selector panel can be used or an additional PC network card LBB 3510/00 must be installed in the client PC.

Output 1	Output 2	Output 3	Output 4	Trunk	Tap-off
					115	V T4A 230V	T2A
							LBB 4116/xx

PCF ≤ 90

NOTE: The above example uses the IN-DIRECT (PC-Network card LBB 3510/00) method of trunk-line cabling connecting the PC to the DCN.

Bosch Security Systems 04-2003 3922 988 43318 en Computer Based Systems