Bosch Appliances 3922 988 43318 manual Connection PC to CCU

Digital Congress Network Installation and Operating Manual Chapter 5 - Control using PC en 5-6

5.5Connection PC to CCU

Two methods for connecting the DCN Control PC to the CCU are available:

1.‘DIRECT’ connection from a serial COM-port of the DCN Control PC to the serial COM-port of the CCU (not applicable for CCU type LBB 3500/05).

2.Using PC-Network card LBB 3510/00. (see Note 2). For installation details see Chapter 5.2.

NOTES:

1. This function is only possible when the ‘Windows® 95 or 98’ operating system installed on the DCN Control PC. It is NOT possible when running under the ‘Windows® NT

4.0 and ‘Windows® 2000 operating systems.

2.Simultaneous use of the PC-Network card LBB 3510/00 and ‘DIRECT’ PC control is NOT possible.

The examples shown in this chapter are:

1.SINGLE-CCU system with control PC and Camera control

2.Multi-CCU System with control PC and Camera control

For further information refer to Chapter 10.. Installation techniques

Bosch Security Systems 04-2003 3922 988 43318 en Connection PC to CCU