Bosch Appliances 3922 988 43318 manual Menu c. Select Desk Number Within a Booth

Digital Congress Network Installation and Operating Manual Chapter 11 - System Set-up and Operation en 11-23

Menu c. SELECT DESK NUMBER WITHIN A BOOTH

To assign the interpreter desk with a specific number within a booth. Each interpreter desk installed in the system needs to be programmed individually.

Procedure:

Select Menu c, ‘Select desk number’ as described in step 2 (Programming procedures).The following Menu is displayed:

Select desk number:

<1> 2 3 4 5 6 c

abc

A B

Engaged

1.Rotate the ‘Relay select’ knob to scroll and select the required booth number as described in Programming procedures Step 3.

2.Press the ‘Floor’ key to enter the required desk number. Refer to step 4.

Menu d. SELECT NUMBER OF CHANNELS

To set the number of language channels. In stand-alone systems the maximum number of channels available is 11 in PC-based systems 15.

NOTE: Up to 30 interpretation channels are supported with PC software when special interpreter desks and language channel selectors are used. For more information about this functionality refer to the manual for software application ‘Simultaneous Interpretation’ LBB 3572, Appendix A.

Once set, this number will be applicable for all desks installed in the system, therefore this procedure only needs to be done once.

Procedure:

Select Menu d, ‘Select number of channels’ as described in step 2 (Programming procedures).The following Menu is displayed:

Select number of channels:

<1> 2 3 4 5 6 7 8 9 10 11 d

abc

A B

Engaged

1.Rotate the ‘Relay select’ knob to scroll and select the required number of channels as described in Programming procedures Step 3.

2.Press the ‘Floor’ key to enter the required number of channels. Refer to step 4.

Bosch Security Systems 04-2003 3922 988 43318 en Programming the Interpreter desk