HP UX Auto Port Aggregation (APA) Software manual Save the configuration. Enter

2.Configure HP APA. Do the following:

a.Unplug all LAN connections to be aggregated.

b.Create the aggregations. They must be either 2 or 4 port trunks. For two-port aggregations, the beginning port number must be odd. For four-port aggregations, the beginning port number must be a number divisible by 4 plus 1 (for example, 1, 5, 9, 13). Use the following command to create a four-port aggregation:

HP9304(config)#trunk server e 1/5 to 1/8

c.Save the configuration. Enter:

HP9304(config)#write mem

d.Reboot the switch. Enter the following:

HP9304(config)#exit HP9304#reload

e.After switch reboots, plug in the cables and display the trunk configuration as follows:

HP9304>show trunk

Information similar to the following displays:

Configured trunks: Trunk Type Ports

3 Server 1/5 1/6 1/7 1/8

5Server 1/9 1/10 1/11 1/12

17Server 2/1 2/2

19Server 2/5 2/6

20Server 2/7 2/8

21Server 2/9 2/10

Operational trunks:
Trunk Type		Ports	Duplex	Speed Tag		Priority
3	Server	1/5 1/6 1/7 1/8	Full	100M	No	level0
5	Server	1/9 1/10 1/11 1/12	Full	100M	No	level0
17	Server	2/1 2/2	Full	100M	No	level0
19	Server	2/5 2/6	Full	100M	No	level0
20	Server	2/7 2/8
21	Server	2/9 2/10	Full	100M	No	level0

To remove the trunk in the previous example, enter the following:

no trunk server e 1/5 to 1/8

126 Switch Configuration Information