HP UX Auto Port Aggregation (APA) Software manual

On the server side, complete the following steps:

1.Create link aggregate lan901.

2.Create failover group lan902.For HP-UX 11i v2 and earlier versions, the primary port in the failover group must have an IP address configured on it.

3.Create VLANs 333 and 334 over lan902. Enter:

#lanadmin -V create vlanid 333 902 Successfully configured.

lan5000: vlanid 333 name UNNAMED pri 0 tos 0 tos_override IP_HEADER pri_override CONF_PRI ppa 902

#lanadmin -V create vlanid 334 902

Successfully configured.

lan5000: vlanid 334 name UNNAMED pri 0 tos 0 tos_override IP_HEADER pri_override CONF_PRI ppa 902

Configuring VLANs over Failover Groups 117