HP UX Auto Port Aggregation (APA) Software Tag ports F17 and F18 to VLANs 333 and 334. Enter

3.Verify that the VLANs with IDs 333 and 334 are tagged correctly. Enter:

Switch 1# show vlan 333

Status and Counters - VLAN Information - Ports - VLAN 333

802.1Q VLAN ID : 333

Name : vlan_333

Status : Port-based

Voice : No

Port Information Mode		Unknown VLAN Status
----------------	--------	------------	----------
Trk4	Tagged	Learn	Up
Switch	1# show vlan 334
Status and Counters - VLAN		Information - Ports - VLAN 334

802.1Q VLAN ID : 334

Name : vlan_334

Status : Port-based

Voice : No

Port	Information Mode	Unknown VLAN	Status
----------------	--------	------------	----------
Trk4	Tagged	Learn	Up

To create the VLANs on Switch 2, complete the following steps:

1.Create the VLANs with IDs 333 and 334. Enter:

Switch 2#

Switch 2# configure

Switch 2(config)# vlan 333 name vlan_333 Switch 2(config)# vlan 334 name vlan_334

2.Tag ports F17 and F18 to VLANs 333 and 334. Enter:

Switch 2(config)# vlan 333 tagged F17 Switch 2(config)# vlan 333 tagged F18 Switch 2(config)# vlan 334 tagged F17 Switch 2(config)# vlan 334 tagged F18 Switch 2(config)# exit

3.Verify that the VLANs with IDs 333 and 224 are tagged correctly. Enter:

Switch 2# show vlan 333

Status and Counters - VLAN Information - Ports - VLAN 333

802.1Q VLAN ID : 333

Name : vlan_333

Status : Port-based

Voice : No

Port Information Mode		Unknown VLAN Status
----------------	--------	------------	----------
F17	Tagged	Learn	Up
F18	Tagged	Learn	Up
Switch 2# show vlan 334
Status and Counters - VLAN		Information - Ports - VLAN 334
802.1Q VLAN ID : 334
Name : vlan_334
Status : Port-based
Voice : No
Port Information Mode		Unknown VLAN Status
----------------	--------	------------	----------
F17	Tagged	Learn	Up
F18	Tagged	Learn	Up

116 VLANs over APA Using HP Procurve Switches