HP UX Auto Port Aggregation (APA) Software manual Configuring Link Aggregates

Figure 3-23 Configuring Link Aggregates

12.Fill in the desired IP address and subnet mask to be used for the link aggregate.

13.Click the Advanced Options button to display a window similar to Figure 3-24.

Figure 3-24 Link Aggregate Advanced Options

14.Verify the correct settings for the Group Capability (11i v1), assigned in step 4, and either Hot Standby or the load balancing (distribution) algorithm (not both). Make the necessary changes, if required. Then click OK.

15.Click Add or Delete Network Physical Ports. A window similar to Figure 3-25appears.

44 Configuring APA