Bosch Appliances 3922 988 43318 manual Connecting Peripheral devices, CHIP-CARD Encoder

Digital Congress Network Installation and Operating Manual Chapter 5 - Control using PC en 5-13

5.8Connecting Peripheral devices

PC		Serial Printer/Card encoder
DCD 1		9-pole - 25 pole		2	TxD	MATRIX printer (COM 1* or COM 2*)
						Connects via a serial port (COM1* or COM
	RxD 2			3	RxD
	TxD 3			4	RTS	2*) of a DCN Control PC, to provide a hard
	DTR 4			5	CTS	copy data for speaker logging and printing
GND 5				6	DSR
						card labels. The print function within
	DSR 6			7	GND
	RTS 7			8	DCD	different DCN software packages can be
	CTS 8			20	DTR	activated.
	n.c. 9	(female)	(male)	22	n.c
9-pole D-type			25-pole D-type
PC		Serial Printer/Card encoder				CHIP-CARD ENCODER
		25-pole - 25 pole
Chassis 1					Chassis	(COM 1* or COM 2*)
				1
	TxD 2			2	TxD	Connects via a serial port (COM 1* or COM
	RxD 3			3	RxD	2*) to encode delegate ID cards for use in
	RTS 4			4	RTS	the DCN system, as well as reading raw data
	CTS 5			5	CTS
	DSR 6			6	DSR	on used cards. The encoder can be used in
GND 7				7	GND	combination with DCN encoder software
DCD 8				8	DCD	package LBB 3581/00 and Delegate
	DTR 20	(female)	(male)	20	DTR
						Database software package LBB 3580,
25-pole D-type			25-pole D-type
PC					Laser printer
		25-pole - 36 pole			nSTROBE 1	LASER printer (LPT1)
1	nSTROBE					Connects via a parallel port (LPT1) of DCN
2	DATA 1				DATA 1 2
						Control PC, to provide a high-quality hard
3	DATA 2				DATA 2 3
4	DATA 3				DATA 3 4	copy data such as voting results,
5	DATA 4				DATA 4 5	attendance registration and delegate lists.
6	DATA 5				DATA 5 6
						The print function within different DCN
7	DATA 6				DATA 6 7
						software packages can be activated. The
8	DATA 7				DATA 7 8
9	DATA 8				DATA 8 9	printer should be equipped with a minimum
10	nACKNLG				nACKNLG 10	2 MB internal memory (4 MB
11	BUSY				BUSY 11
						recommended).
12	CALL (PE)				CALL (PE) 12
13	SELECT				SELECT 13
14	nAutoFd				nAutoFd 14
18	GND				GND 19	*The default COM ports can be set by changing
. .					. .
. .					. .
. .					. .	the dcn.ini file located in the DCN control PC
25	GND				GND 30
15	nFAULT				nFAULT 32	(see Tables 5.10 and 5.11)
17	nSelIn	(male)			nSelIn 36
			(male)
25-pole D-type					36-pole Centronics

FIG 5-9 Connecting Peripheral devices

Bosch Security Systems 04-2003 3922 988 43318 en Connecting Peripheral devices