Bosch Appliances 3922 988 43318 Entering the desks programming mode, Menu Programming procedures

Digital Congress Network Installation and Operating Manual Chapter 11 - System Set-up and Operation en 11-21

11.11.2 Entering the desks programming mode

Before attempting to program the interpreter desk, ensure that the system has first been initialized (see Chapter 11.1 Initializing). If the system has been initialized and the display shows ‘DESK NOT INSTALLED‘ ,the desk is ready to be programmed.

* * * * * * * DESK NOT INSTALLED * * * * * * *

NOTE: Only one desk can be programmed at the same time.

To enter the desk in to its “Programming” mode proceed as follows::

1.Press the key ‘Pre-select b’ and the ‘Outgoing B’ keys simultaneously. The Installation mode is shown as follows:

Installation mode, press ‘Floor’ to enter or ‘Mute’ to clear, use ‘Select’

knob to select option and B - select ‘<>’ keys to select next or previous function

11.11.3 Menu Programming procedures

STEP 1. Press the ‘B-Select’ up/down keys < > to scroll through and select the required Installation menu.

STEP 2. Once in the chosen menu, rotate the ‘Relay select’ knob (left, up, right, down) to high- light the required selection. Arrow brackets <..> highlight the chosen entry. If this function is not available, press the ‘Mute’ key to clear a previous setting.

A previous setting is displayed with square brackets [..].

STEP 3. To input and confirm the selected entry, press the ‘Floor’ key. Once entered, the selected entry is surrounded with square brackets [..].

STEP 4. Press the ‘Mute’ key to clear a previous settings. Pressing this key throughout the programming mode allows a previous settings to be cleared, ready for new input data and errors to be corrected.

NOTE: Due to the length of the opening message, the message is displayed over additional screens.The message in full is as follows:

Installation mode, press ‘Floor’ to enter or ‘Mute’ to clear, use ‘Relay select’ knob to select option and B-select ‘<>’ keys to select next or previous function.

Bosch Security Systems 04-2003 3922 988 43318 en Programming the Interpreter desk