specifications
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
Continuous power output (20Hz—20kHz at 0.05% THD), per channel
2 channels driven | 150W |
All channels driven | 120W |
THD at full rated power | <0.2% |
Residual noise & hum | <0.25mV unweighted 20Hz – 22kHz |
Inputs |
|
Phono input: |
|
Input sensitivity at 1kHz | 5mV |
Input impedance | 47kΩ |
Signal/noise ratio (CCIR, 65W) | 88dB |
Overload margin | 31dB |
Line inputs: |
|
Nominal sensitivity | |
Input impedance | 47kΩ |
Signal/noise ratio (CCIR, 65W) | 100dB |
Preamplifier outputs |
|
Max output level | 6V RMS |
Output impedance | <50Ω |
THD+N | |
Video inputs |
|
Component video signal/noise | 85dB |
Composite video signal/noise | 70dB |
Headphone output |
|
Maximum output level into 600Ω | 4V |
Output impedance | <5Ω |
General |
|
Mains voltage | |
Power consumption (maximum) | 1.5kVA (Thermal dissipation approx. 2300 BTU/hour) |
Power consumption (idle, typical) | 120VA (Thermal dissipation approx. 410 BTU/hour) |
Power consumption (standby) | 3VA |
Dimensions W x D x H (including feet) | 432 x 450 x 180mm |
Weight (net) | 25.0kg |
Weight (packed) | 28.0kg |
Supplied accessories | Mains lead |
| CR102 remote control |
| 4 x AAA batteries |
| Manual |
| HDMI lead support bar |
| DAB aerial (if DAB module fitted) |
| FM aerial |
| AM loop aerial |
| Calibration microphone |
E&OE |
|
NOTE: All specification values are typical unless otherwise stated.