Arcam AVR600 manual SAT Device Mode, AV Device Mode, Menus

The A

���SAT Device Mode

The Z Device Mode button configures the CR102 to control the functions of a satellite receiver. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects SAT as the AVR600 source.

PToggles power between standby and on

0…9	Functions as original remote number key.
PHONO	Selects Tape input on the AVR600.

EAVR600SHIFT + Eselects PHONO input on the

TV/AV Toggles between the available inputs on

Ryour satellite receiver

SModifies many keys (see individual key descriptions, below)

AUX Selects multichannel (MCH) input on the

HAVR600.

AVR600.SHIFT + Hselects AUX input on the

NET Selects iPOD input on the AVR600

ESHIFT + E selects network (net) internal input on the AVR600

	Navigate menus.
��	OK confirms a setting (equivalent to ‘Enter’
	or ‘Select’ on some remotes).

MControls Backup function, if available.

UPerforms same function as on original remote, if available.

DOn some Satellite and Cable set top boxes this key functions as the Guide key to open the EPG (Electronic Program Guide).

@Toggles the mute function.

By default this key operates the AVR600 Mute

]	Channel down
[	Channel up
- +	Decrease (–) or increase (+) AVR600 volume
)	Fast rewind
$	Starts the playback

&Toggles pause of playback

( Fast forward

!(not used)

#Stop playback

%Start recording

H(not used)

UDuplicates function of RED key for some

Satellite and Cable set-top boxes(RED)

TDuplicates function of GREEN key for some

Satellite and Cable set-top boxes(Green)

ODuplicates function of YELLOW key for some

(Yellow) Satellite and Cable set-top boxes

BDuplicates function of BLUE key for some

Satellite and Cable set-top boxes(Blue)

��AV Device Mode

Device Mode button configures the CR102 to control the functions of a television or other display device. You will need to configure this Device Mode to work with your equipment. Pressing this button also selects AV as the AVR600 source.

PToggles power between standby and on. (Some TVs require you to use a number key to turn them on.)

0…9	Functions as original remote number key –
	usually for channel selection.
Phono	Selects Tape input on the AVR600.

ESHIFT + Eselects PHONO input on the AVR600.

TV/AV Toggles between the available inputs on

Ryour display device (e.g. TV/AV)

SModifies many keys (see individual key descriptions, below)

AUX Selects multichannel (MCH) input on the

HAVR600.

AVR600.SHIFT + Hselects AUX input on the

	Navigate setup and programme selection
��	menus.

OK confirms a selection (equivalent to ‘Enter’ or ‘Select’ on some remotes).

MEXIT function on some models.

UFunctionsavailable. as original remote key, if

DDisplay INFO or OSD (On Screen Display) function, if available.

@Toggles the mute function.

By default this key operates the AVR600 Mute

]	Channel down
[	Channel up
	Decrease ( ) and increase ( ) AVR600
	–	+
- + volume.
)	Toggles TEXT page on/off
$	TEXT page off

&Turns Programme-In-Programme (PIP) on, if available

( Activates PIP move, if available

!Activates PIP swap, if available

#Activates PIP freeze, if available

%Activates PIP channel up, if available

HActivates PIP channel down, if available

UDuplicates function of RED key for Text TV

(RED)

TDuplicatesTV function of GREEN key for Text(Green)

ODuplicatesTV function of YELLOW key for Text(Yellow)

BDuplicatesTV function of BLUE key for Text(Blue)

E-28