Safety notes
For your own safety please be sure to read right through these operating instructions before you use the sub- woofer. It is especially important to observe the following safety notes.
1.The
2.Protect the
3.Do not allow any liquid or foreign bodies to enter the
4.This
5.If the
6.If the
7.When setting up the speaker, ensure that there is an unhindered flow of cooling air to the
Any heat
of the
8.The power supply required for this equipment is printed on the control panel / terminal plate.
The
nectedsupply. to any other form of power
9.The mains lead must be deployed in such a way that there is no danger of damage from furniture, or people treading on it. Take particular care with plugs, distribution panels and the connections on the sub- woofer. Never exert undue force on the mains plug.
10.The
11.With the exception of the connections and procedures described in these instructions, no work of any kind may be carried out on the
12.The
13.If the
14.Care of the
•Always disconnect the system from the mains supply before cleaning it.
•Never use abrasive or
•Before switching the unit on again, check carefully that no
FCC Information to the user
(for use in the United States of America only)
Class B digital device – instructions:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
19