A17 |
Connect wiring harness. DO NOT ALLOW THE MOTOR TO
HANG FROM THE WIRING HARNESS.
A18 |
I |
Reinstall the motor by inserting the tabs and pushing up
into position. Make sure the wires are not pinched
between the motor and the housing.
A19 |
J |
Secure the motor by tightening the 2 screws.
A20 |
Turn on the power source.
A21
ON
A22
Go to step
E1
OFF
on page 17 to attach grille.
Test the motor. If the motor does not run, check the plug
connection.
7
3/13/06 12:08:43 PM