C15C16
Drill a hole in the center of each outline. | Insert screws, leaving space between the screw head |
| and the joist. Screws are not provided. |
C17 | C18 |
Attach the rails onto the screws. | Tighten screws. |
C19 |
Connect 4” duct and vent to the outside. Tape joints.
If ducting does not fit securely, an adapter may
need to be purchased.
12
C20 |
Route wires through the strain relief. For supply connection,
use wires suitable for at least 90º C (194º F).
3/13/06 12:08:57 PM