Zanussi ZGF 782 CTX, ZGF 782 CTN manual Contents

Page 3

Contents

For the User

 

For the Installer

 

Important Safety Information

2

Instructions for the Installer

8

Description of the Hob

4

Important safety requirements

9

Operation

5

Installation

10

Maintenance and Cleaning

6

Building In

11

Something Not Working?

7

Electrical connections

12

Guarantee/Customer Service

16

Wiring Diagram

13

European Garantee

17

Fault Finding

13

 

 

Commissioning

15

 

 

Conversion from Natural Gas to LPG

15

Environmental Information

zAfter installation, please dispose of the packaging with due regard to safety and the environment.

zWhen disposing of an old appliance, make it unusable, by cutting off the cable.

zThe symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Keep this instruction book for future reference and ensure it is passed on to any new owner.

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

)Step by step instructions for an operation Hints and Tips

Environmental Information

This appliance complies with the following

E.E.C. Directives:

*73/23 - 90/683

(Low VoltageDirective);

*93/68 (General Directives);

*89/336 (Electromagnetical Compatibility Directive);

*90/396 (Gas Appliances), and subsequent modifications

3

Image 3
Contents GAS HOB ZGF 782 CTN ZGF 782 CTX Service Important Safety InformationInstallation Child SafetyContents Description of the Hob Burner Minimum Maximum Diameter Using the Wok StandOperation Hob burnersIgnition electrode Maintenance and CleaningHob Top BurnersSymptom Solution Something Not Working?Cast Iron Pan Supports Engineers technical data Instructions for the InstallerImportant safety requirements Provision for ventilationLocation Cut Out Size InstallationWhen the HOB is First Installed Gas ConnectionFitting the Hob into the worktop BuildingBuilding over a cupboard or drawer Building over a kitchen unit with doorPermanent Connection Supply cable replacementElectrical connections This HOB Must be EarthedPreliminary Electrical Systems Check Wiring DiagramFault Finding Ignitor Switch Ignitor UnitIgnition System / Gas Ignition Conversion from Natural Gas to LPG To adjust the gas ratePressure Testing CommissioningCustomer Care Service and Spare PartsEuropean guarantee Page Page 35687-7802 11/06