Zanussi ZCM 600 W, ZCM 610 X manual Something not working, Symptom Solution

Page 20

Something not working

If the aplliance is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

 

SYMPTOM

SOLUTION

 

There is no spark when lighting the gas

Check that the unit is plugged in and the electrical

 

 

supply is switched on

 

 

Check that the RCCB has not tripped (if fitted)

 

 

Check the mains fuse has not blown

 

 

Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

The gas ring burns unevenly

Check the main jet is not blocked and the burner

 

 

crown is clear of food particles.

 

 

Check the burner cap and crown have been

 

 

replaced correctly, e.g. after cleaning.

 

 

 

 

The oven does not come on

Check the oven is in manual operation and that

 

 

both a cooking function and temperature have been

 

 

selected.

 

 

Check the oven is wired in properly, and the

 

 

socket switch or the switch from the mains supply to

 

 

the oven are ON.

 

 

 

 

The oven temperature light does not come on

Select a temperature with the thermostat control

 

 

knob

 

 

Select a function with the oven function control

 

 

knob.

 

 

 

 

The oven light does not come on

Check the light bulb, and replace it if necessary

 

 

(see "Replacing the Oven Light")

 

 

 

 

It takes too long to finish the dishes, or they are

The temperature may need adjusting

 

cooked too fast.

 

 

 

 

 

 

Steam and condensation settle on the food and the

Refer to the contents of this booklet, especially to

 

oven cavity.

the chapter “Using the Oven”.

 

 

 

 

Leave dishes inside the oven no longer than 15-20

 

 

minutes after the cooking is completed.

 

 

 

 

The timer does not work

Check the instructions for the timer.

 

 

 

 

The oven fan is noisy

Check the grease filter is correctly fitted.

 

 

Check that shelves and bakeware are not vibrating

 

 

in contact with the oven back panel.

 

 

 

20

Image 20
Contents Mixed Fuel Cooker Important Safety Information Child SafetyService During UseContents Description of the Cooker Fitting the Splash back only in model ZCM 610Accessories Control PanelInstallation When the Cooker is First InstalledOperation ControlsThermostat Control Knob Electric OvenOven Function Control Knob Hour Clock and Timer Things to Note TimerTo Cancel the Timer Using the Oven Before the First Use of the CookerFrom the oven when opening the oven door to Hints andTipsCondensation and steam CookwareEven Heating for Baking Using the Fan OvenLower Temperatures Meat Thermostat Cooking Roasting ChartFood Thermostat Runner Time Hints andTips How to Use Defrosting DefrostingFood Conventional Grill How to Use the GrillGrilling Maintenance and Cleaning HobTop Pan Supports BurnersExternal cleaning Cleaning the OvenCleaning materials Oven Shelves Oven lamp replacementOven Cavity Symptom Solution Something not workingService and Spare Parts Zanussi Guarantee ConditionsPeace of Mind for 12 Months Customer CareInstructions for the Installer DimensionsAppliance Category II 2H3+ HobImportant Safety Requirements Provision forVentilationLocation Positioning the CookerInstallation Connecting to Gas Wall FaceElectrical connections This Cooker Must be EarthedCommissioning ProcedurePressure Testing To Adjust the GAS Rate Method