Zanussi ZBM 878 Programming the Oven, How to set the minute minder, To cancel the Minute Minder

Page 11

Programming the Oven

How to set the minute minder

1) Press button to select the Minute Minder Function. The relevant pilot light will flash and the control panel will display 0.00.

2) Press button or within 3 seconds to select the required time (up to 19 hours 59 minutes). The Minute Minder will wait 3 seconds and then start running.

3)The display will count down the programmed time in minutes.

4)When the programmed time has elapsed, an acoustic alarm will be heard, and 0.00 will flash on the control panel. The oven will NOT switch off if in use.

5)To switch off the acoustic alarm, press any

button. The control panel will display the time of day and the Minute Minder pilot light will go out.

To cancel the Minute Minder:

press button

 

and, while keeping it

 

pressed, press button

 

too. The display

 

will show 0.00.

To programme the Oven to switch off

1) Place food in the oven, select a cooking function and adjust the cooking temperature if required.

2)Press button to select the Cooking Duration function. The Cooking Duration pilot light will flash and the control panel will display 0.00.

3)Press button or to select the required time (up to 19 hours 59 minutes). The programmer will wait 3 seconds and then start running.

4)The display will count down the programmed time in minutes.

5)When cooking time is over, the oven will be switched off automatically and an acoustic alarm will be heard, while 0.00 will flash on the control panel.

6)To switch off the acoustic alarm, press any button. The control panel will display the time of day and the Cooking Duration pilot light will go out.

To cancel the Duration Time:

press button and, while keeping it

pressed, press button too.

If this operation is carried out while a program is running on, the oven will NOT switch off.

i

When a Cooking Duration time is set, the oven will switch off a few minutes before the end of the programmed time, and use the residual heat. See “Safety and Energy Saving Functions”.

12

Image 11
Contents BUILT-IN Oven Model ZBM Important Safety Information Contents Description of the Oven Push Buttons Control PanelIncrease and Decrease Push Buttons How to set theTime of DayOn/Off Push Button Oven Function Control Push Button200C How to select a Cooking Function andTemperatureDefrost Function Fast Heat Up functionBefore the First Use Using the OvenCooling fan From the oven when opening the oven door toHints andTips Condensation and steamTo cancel the Duration Time How to set the minute minderTo programme the Oven to switch off To cancel the Minute MinderTo programme the Oven to switch on and off To unlock the oven Safety Cut-Off FunctionChild Safety Function Residual Heat FunctionThings to Note Lower TemperaturesFan Oven Even Heating for BakingHints andTips Bottom oven element only Pre-set temperature is 250CConventional Oven Cooking Chart Fan Conventional Oven Defrosting How to Use DefrostingGrilling How to Use the GrillHow to Use theThermal Grill How to Use the Inner Grill ElementThermal Grilling Select a maximum temperature of 200CGrill Inner Grill Baking Function Pizza OvenBaking Function External cleaning Cleaning the OvenCleaning materials Grease Filter To clean the grease filterOven Cavity Cooking to Reduce Soilage Care of catalytic linersReplacing the Oven Light Cleaning the hinged grill If something goes wrong Symptom SolutionCustomer Care Service and Spare PartsZanussi Guarantee Conditions Peace of Mind for 24 MonthsRecess InstallationDimensions Electrical ConnectionSecuring The Oven To The Cabinet Building