Zanussi ZBM 878 manual If something goes wrong, Symptom Solution

If something goes wrong

If the oven is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Force Centre.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

SYMPTOM	SOLUTION
■ The oven does not come on	◆ Press the OVEN ON button, then select a cooking
	function.
	◆ Check the fuse and ensure the socket switch or the
	switch from the mains supply to the oven are ON.
■ The oven light does not come on	◆ Siwtch on the oven using push button 1.
	◆ Check the light bulb, and replace it if necessary
	(see "Replacing the Oven Light")
■ It takes too long to finish the dishes, or they are	◆ The temperature may need adjusting
cooked too fast.
	◆ Refer to the cooking function sections and to any
	cooking chart provided
■ Steam and condensation settle on the food and the	◆ Leave dishes inside the oven no longer than 15-20
oven cavity.	minutes after the cooking is completed.
■ The timer does not work	◆ Check the instructions for the timer.
■ The oven fan is noisy	◆ Check the grease filter is correctly fitted.
	◆ Check that shelves and bakeware are not vibrating
	in contact with the oven back panel.

If after all these checks, the oven still does not work, contact your local Zanussi Service Force Centre. When you contact them, they will need the following information:

1.Your name, address and post code.

2.Your telephone number

3.Clear and concise details of the fault

4.The model and the serial number (which can be found on the rating plate)

5.Date of purchase

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

28