INSTALLING THE COOKER HOOD
Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check the wall to which the cooker hood is to be fitted for electric cables, water pipes or gas.
This cooker hood is designed to be fixed to any orizontal surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
Unpacking
Before unpacking the cooker hood position the carton with the arrows pointing upwards as illustrated on the carton.
The cooker hood is made up of the following com- ponents:
Ref. Q.ty Product Components
11 Hood Body, complete with: Controls, Light, Blower, Filters
2 | 1 | Upper Chimney | |
7.1 | 1 | Telescopic frame complete with extractor, | |
|
|
| consisting of: |
| 7.1a | 1 | Upper frame |
7.1b | 1 | Lower frame | |
8 | 1 | Air Outlet Grill | |
9 | 1 | Reducer Flange ø | |
9a | 1 | ||
14.1 | 1 | Air Outlet Connection Extension | |
14.2 | 1 | Air Outlet Extension | |
15 | 1 | Air Outlet Connection | |
25 | 2 | Pipe clamps | |
|
|
|
|
Ref. | Q.ty | Installation Components | |
12f | 4 | Screws M6 x 15 | |
21 | 1 | Drilling template | |
|
|
|
|
|
| Q.ty | Documentation |
|
| 1 | Instruction Manual |
14.1
2114.2
15
7.1a14
25
9a
7.1
9
7.1b
2
8
1
12f
12