Zanussi ZHC 590 manual Operating Instructions, Control Panel

OPERATING INSTRUCTIONS

The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. The appliance can be installed to recirculate or extract contaminated air.

Control Panel

The hood can be switched on pushing directly onto the requested speed without firstly having to select 0/1 but- ton.

KEY		LED	FUNCTIONS
L	0/1 Light		Turns lighting on and off.
T1	0/1 Motor	on	First speed.
			When pressed for about 1 seconds the
			motor is switched off.
T2	Speed	on	Second speed.
T3	Speed	on	Third speed.
T4	Speed	Fixed	Max. speed
		Flashing	Intensive speed.
			Suitable for the strongest cooking vapours
			and odours. The function becomes active
			when the button is pushed for about 2
			seconds. After 10 minutes of	functioning
			it turns off automatically. This function can
			be interrupted by means of pressing any
			of the buttons.
S1	Led	Fixed	Indicates that the Metal grease filters
			saturation alarm has been triggered, and
			the filters need to be washed. The alarm is
			triggered after 100 working hours. (Reset;
			check the Maintenance-paragraph)
		Flashing	indicates that the activated charcoal odour
			filter saturation alarm has been triggered,
			and the filter has to be replaced; the metal
			grease filters must also be washed. The
			activated charcoal odour filter is triggered
			after 200 working hours.	(Activation
			and Reset; check the Maintenance-
			paragraph)

L

T1

T2

T3

T4

S1

5