MAINTENANCE AND CLEANING
Before carrying out any maintenance or clean- ing isolate the cooker hood from the mains supply.
The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard.
External Cleaning
Wipe the cooker hood frequently with warm soapy water using a mild detergent.
Never use scouring pads or abrasive cleaners. Never use excessive amounts of water when cleaning particularly around the control panel.
Metal Grease Filters
The filters are washable and must be cleaned when the Led S1 lights up or at least every 2 months of opera- tion, or more frequently for particularly heavy usage.
Remove the metal grease filters one at a time by:
• Open the lighting unit by pulling on the notch.
• Releasing the catches on the filters, the filters can be removed.
The metal grease filters should be washed, by hand, in mild soapy water or in a dishwasher. Allow to dry completely before replacing.
Alarm signal reset
Switch off the lights and extractor motor. Press Button T3 for at least 3 seconds, until the leds start to flash.
7