Zanussi ZHC705, ZHC905 Installation Instructions, Electrical Connections, Electrical Requirements

Page 10

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifi cations or attempt to modify this product in any way.

 

 

Technical Information

 

 

 

 

 

DIMENSIONS

HEIGHT OF CANOPY:

 

24cm

 

HEIGHT OF CHIMNEY:

(UPPER SECTION)

20cm

 

 

 

(LOWER SECTION)

56cm

 

WIDTH OF CANOPY - ZHC 605:

 

59,8cm

 

WIDTH OF CANOPY - ZHC 705:

 

69,8cm

 

WIDTH OF CANOPY - ZHC 905:

 

89,8cm

 

DEPTH OF CANOPY:

 

 

49cm

 

GROSS - ZHC 605:

 

 

16kg

 

GROSS - ZHC 705:

 

 

16,5kg

 

GROSS - ZHC 905:

 

 

17,6kg

 

NET - ZHC 605:

 

 

12,4kg

 

NET - ZHC 705:

 

 

12,8kg

 

NET - ZHC 905:

 

 

13,7kg

ELECTRICAL SUPPLY:

VOLTAGE:

 

220-240 V 50Hz

 

POWER CONSUMPTION:

 

230W

 

FAN MOTOR:

 

 

150W

 

LIGHT BULB:

(2 x 40 W)

 

80W

SUITABLE FOR INSTALLATION

 

 

 

 

ABOVE:

ELECTRIC HOB:

 

 

7KW (max)

 

GAS HOB:

 

 

10KW (max)

 

SLOT-IN GAS COOKER

 

13.5KW (max)

 

SLOT-IN ELECTRIC COOKER

 

12.4KW (max)

 

 

 

Note: CE Marking certifies that this appliance complies with the requirements

 

 

laid down in EEC directive 89:336. (Electromagnetic compatibility) and

 

 

subsequent modifications and Low Voltage directive 72/23/E.

 

 

 

 

 

 

 

 

ELECTRICAL CONNECTIONS

DOUBLE INSULATED DO NOT EARTH

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualifi ed electrician e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate inside the cooker hood.

This appliance is fi tted with a 3 core mains cable and must be permanently connected to the electricity supply via a double-pole switch having 3mm minimum contact gap on each pole. A Switched Fuse Connection Unit to BS1363 Part 4, fi tted with a 3 Amp fuse, is a recommended mains supply connection accessory to ensure compliance with the Safety Requirements applicable to fi xed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC Directive No. 78 308 regarding suppression of radio and television interference.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Cooker Hood Service Force Centres For the User For the InstallerMaintenance and Cleaning Operating InstructionsChild Safety Important Safety InformationInstallation Maintenance and ServiceWorktop Lighting Your Appliance Operating InstructionsCooker Hood Controls Fan ControlExtraction To OperateRecirculation Select the required fan speed and light if requiredMetal Grease Filters Maintenance and CleaningExternal Cleaning Remove the metal grease filters one at a time byTo Remove/Replace Charcoal Filters Charcoal FiltersChanging the Light Bulb Symptom Solution Service and Spare PartsSomething not Working Guarantee Conditions Electrical Requirements Installation InstructionsElectrical Connections Electrical ConnectionUnpacking Installing the Cooker HoodInstallation Requirements Screws M4x25Built-in Electric Hob 30 1/2 when installed above a slot-in gas cookerClearance Height Built-in Gas hobFitting the Wall Brackets Fitting the Canopy HoodFitting the Ducting Recirculation ModeExtraction Ducted 150Fitting the Upper Chimney Fitting the Lower Chimney43600252901
Top Page Image Contents