Zanussi ZHC905, ZHC705, ZHC605 manual Fitting the Upper Chimney, Fitting the Lower Chimney

Page 15

Fitting the Upper Chimney

•Slightly widen the two sides of the upper chimney and hook them behind the brackets item 7.2.1 ensuring they are correctly seated.

•Secure the sides to the brackets using the 4 screws item 12c (2.9 x 9.5mm) supplied.

•Slightly widen the two sides of the lower chimney and hook them between the upper chimney and the wall, ensuring they are correctly seated.

•Fix the lower chimney to the hood body using 2 screws item 12c (2.9 x 9.5mm) supplied.

•Make sure that the air outlet connection is aligned with the chimney outlets.

2.2

2.1

12c

Image 15

Contents Cooker Hood Operating Instructions For the User For the InstallerMaintenance and Cleaning Service Force CentresMaintenance and Service Important Safety InformationInstallation Child SafetyFan Control Your Appliance Operating InstructionsCooker Hood Controls Worktop LightingSelect the required fan speed and light if required To OperateRecirculation ExtractionRemove the metal grease ﬁlters one at a time by Maintenance and CleaningExternal Cleaning Metal Grease FiltersCharcoal Filters To Remove/Replace Charcoal FiltersChanging the Light Bulb Service and Spare Parts Symptom SolutionSomething not Working Guarantee Conditions Electrical Connection Installation InstructionsElectrical Connections Electrical RequirementsScrews M4x25 Installing the Cooker HoodInstallation Requirements UnpackingBuilt-in Gas hob 30 1/2 when installed above a slot-in gas cookerClearance Height Built-in Electric HobFitting the Canopy Hood Fitting the Wall Brackets150 Recirculation ModeExtraction Ducted Fitting the DuctingFitting the Lower Chimney Fitting the Upper Chimney43600252901