Zanussi Essential Guide for Extractor Fan Filter Cleaning and Maintenance

Page 6

MAINTENANCE AND CLEANING

Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply.

The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard.

External Cleaning

Wipe the cooker hood frequently with warm soapy water using a mild detergent.

Never use scouring pads or abrasive cleaners.

Never use excessive amounts of water when cleaning particularly around the control panel.

Metal Grease Filters

The grease filters absorb grease and dust during cooking to help keep the cooker hood clean inside.

Cleaning

The filters must be washed once every month, using a normal household detergent; their compact dimension also enables them to be washed in a dishwasher. Allow to dry completely before replacing.

Removing and replacing the filters Remove the filters one at a time, press against the metal actuator to release the spring catch as illustrated. When replacing, ensure that the handles face outwards.

Charcoal Filter

In the recirculation mode the charcoal filter absorbs smells and unwanted odours.

The charcoal filter cannot be cleaned or regenerated, and must be replaced approximately every 4 months, or more frequently if the hood is subjected to heavy usage.

Replacing the charcoal filter

First remove the metal grease filters.

Remove the saturated activated charcoal filter by releasing the fixing hooks as illustrated.

5

Image 6
Contents Cooker Hood For the User Important Safety Information Your Appliance Installing the Cooker HoodElectrical Connection Child Safety Important Safety InformationInstallation Maintenance and ServiceYour Appliance Operating Instructions Cooker Hood ControlsTo Operate RecirculationExtraction Metal Grease Filters Maintenance and CleaningExternal Cleaning Charcoal FilterPage Something not Working Symptom SolutionCooker hood has switched off during Cooker hood will not startGuarantee Conditions This Guarantee does not coverInstallation Instructions Technical informationElectrical Requirements Unpacking Installing the Cooker HoodInstallation Components DocumentsInstallation Requirements Clearance HeightsUpper Frame Drilling the Ceiling/Support ShelfFixing the Frame Lower Frame150 Ø120 Ducting ConnectionFitting the Chimney Recirculation ConnectionChimney Stack Fitting the Hood BodyWorking Test Electrolux plc 436001739 01