Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown.
All installations must comply with the local authorities requirements for the discharge of exhaust air.
Incorrect installation may affect the safety of this cooker hood.
Installation Requirements
Before installation check that the wall to which the cooker hood is to be fitted for electric cables, water pipes and gas.
This cooker hood is designed to be fixed to any vertical surface over a cooking area, and can be used in the extraction (ducted to the outside) or recirculation mode.
The installation work must be undertaken by a qualified and competent person.
The manufacturer disclaims any responsibility for damage due to incorrect installation of the cooker hood or if the hood is not installed in compliance with relevant regulations controlling this type of installation.
Clearance Heights
The cooker hood is designed to be fitted over a cooking appliance at the clearance heights stated, providing the maximum output of the appliance beneath does not exceed the maximums quoted in the Technical Specifications.
If the output of the appliance below the cooker hood exceeds the maximum outputs quoted, please refer to the cooker manufacturer’s installation instructions.
A minimum clearance height of 650mm (25½ins) is required when installed above a
A minimum clearance height of 685mm (27ins) is required when installing above a
When installed between adjoining wall cabinets, the wall cabinets must not overhang the hob and the distance between the underside of the cabinet and the worktop must be 450mmm (17¾ins), a gap of 50mm (2ins) must be maintained either side of the hob.
This cooker hood must not be installed above a cooking appliance with a high level grill.
The hood can be installed above these heights but for optimum performance it should be installed at the distances quoted for the appropriate heat source.
11