Position the new charcoal filter in the position marked and while holding the filter replace the fixing hooks as illustrated.
This appliance can be a possible fire hazard if the grease and charcoal filters are not cleaned and replaced as recommended.
Changing the Spot Lamps Remove the two screws fixing the lighting support.
Remove the spot lamp from the holder by pulling the lamp downwards.
Replace the spot lamp by inserting the two pins at the base of the lamp into the holes in holder and pushing into position.
Replace the lighting support, ensuring it is located correctly and fix back into position using the two screws.
If one of the spot lamps has failed to function check that the lamp is fully seated into the lamp holder. If lamp failure has occurred then it should be replaced with a 12V 20W M262 halogen spot lamp.
Replacement filters and lamps can be obtained from your local Service Force Centre.
6