INSTALLATION INSTRUCTIONS
Air outlet directed upwards (Fig.
- Remove the plastic plug from the upper part of the venting grill and replace it on the rear part (Fig. 16).
Air outlet directed towards the wall (Fig. 3):
- Remove the plastic frame from the air outlet (Fig. 17).
-Remove the plug from the upper part of the ducting fan unit (Fig. 18), as it is not possible to insert the flange F with the plug in place.
-Fit the flange F Ø 120 or 150 mm (Fig. 19), replace
the plug.
Air outlet directed to the left or right hand side (Fig. 4a- b):
- Remove the four screws fastening the plastic fra- me, as shown in Fig. 17.
- Fit the ducting spigot R (Fig. 20) and replace the four screws removed as above.
16
17
18
19 |
20 |
16