Zanussi ZHC 916X manual Something not Working, Service and Spare Parts, Symptom Solution

Page 8

SOMETHING NOT WORKING

If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks.

Symptom

Solution

 

 

The cooker hood will not start

• Check the hood is connected to the electricity supply.

 

• Check that the fan speed control is set to 1, 2 or 3.

 

 

The cooker hood is not working effectively

• The fan speed is set high enough for the task.

 

• The grease filter is clean.

 

• The kitchen is adequately vented to allow the entry

 

of fresh air.

 

• If set up for recirculation, check that the charcoal

 

filter is still effective.

 

• If set up for extraction, check that the ducting and

 

outlets are not blocked.

 

 

The cooker hood has switched off during

• The safety cut-out device has been tripped.

operation

• Turn off the hob and then wait for the device to reset.

 

 

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

SERVICE AND SPARE PARTS

If you require an engineer or wish to purchase spare parts contact your local Service Force Centre by telephoning:

08705 929929

Your telephone call will be routed to your local Service Force Centre. The addresses are listed at the back of the book.

For general assistance with your appliance or for information on Zanussi products please contact our Customer Care Department.

Customer Care Department,

Zanussi

55-77 High Street

Slough

Berkshire

SL1 1DZ

Tel: 08705 727 727(*)

*calls to this number may be recorded for training purposes.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Cooker Hood ZHC Electrical Connections Maintenance and CleaningInstalling the Cooker Hood Important Safety Information InstallationChild Safety Maintenance and ServiceYour Appliance Operating Instructions Cooker Hood ControlsRecirculation ExtractionMaintenance and Cleaning External CleaningMetal Grease Filter To Remove the Grease FilterTo Remove the Lamps To Remove the Charcoal FilterWorktop Lighting Something not Working Service and Spare PartsSymptom Solution Standard Guarantee Conditions Peace of Mind for Twenty Four MonthsInstallation Instructions Electrical ConnectionsElectrical Requirements Electrical ConnectionUnpacking Installing the Cooker HoodInstallation Requirements Selecting the type of installation Clearance HeightsFitting the hood canopy Adjusting Position Installation of the Chimney fixing bracketDrilling the shelves Direction and position of the ducting fan unitInstallation Instructions Fixing the chimney Ducting or re-circulation fittingElectrical connection and working test Service and Spare Parts 08705Electrolux plc 432916112

ZHC 916X specifications

The Zanussi ZHC 916X is a modern and efficient kitchen hood designed to enhance your cooking experience by ensuring a clean and fresh kitchen environment. With its sleek stainless steel finish, it not only serves as a functional appliance but also acts as a stylish addition to any kitchen décor.

One of the standout features of the Zanussi ZHC 916X is its exceptional extraction rate. It boasts an impressive airflow performance that can effectively eliminate smoke, steam, and cooking odors from the air. With multiple speed settings, including a powerful boost mode, users can easily adjust the extraction power according to their cooking needs, whether they're simmering sauces or frying up a storm.

This model employs advanced technologies to optimize its performance. The built-in LED lighting provides bright illumination over the cooking area, ensuring that you can see your culinary creations clearly, while also being energy-efficient. The lighting is strategically placed to enhance visibility without generating excessive heat.

The Zanussi ZHC 916X operates quietly, making it a suitable choice for open-plan living spaces where kitchen noise can be disruptive. Its motor is designed to deliver effective extraction without unnecessary noise, allowing for a more enjoyable cooking and dining experience.

Another significant characteristic of the Zanussi ZHC 916X is its flexibility in installation. It can be installed as either an extraction or recirculation hood, making it versatile for various kitchen layouts. For recirculation, it can be equipped with carbon filters that effectively neutralize odors before recirculating the air back into the kitchen.

Maintenance of the Zanussi ZHC 916X is straightforward, thanks to its easily removable and washable grease filters. This feature not only prolongs the life of the hood but also ensures optimal performance by preventing grease buildup. The stainless steel material used in its design makes it easy to clean and resistant to stains and corrosion, ensuring longevity.

In summary, the Zanussi ZHC 916X is a perfect blend of style, efficiency, and practicality. Its powerful extraction capabilities, energy-efficient features, and ease of use make it an excellent choice for anyone looking to elevate their kitchen atmosphere while enjoying the pleasures of cooking. Whether you're a home chef or an occasional cook, this kitchen hood makes a worthy addition to any culinary space.
Top Page Image Contents