Installation, Location, Power connection

INSTALLATION

Location

The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc.

Best performance is obtained with ambient temperature between +18°C and +43°C (class T); +18°C and +38°C (class ST); +16°C and +32°C (class N); +10°C and +32°C (class SN).

The class of your appliance is shown on its rating plate.

For building into kitchen units follow the special “Building-in” instructions given.

Power connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a contact for this purpose.

If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if the above safety precautions are not observed.

This appliance complies with EEC directive number 87/308 of 2/6/87 relative to radio interference suppression.

This appliance complies with the following E.E.C. Directives:

-73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modiﬁcations;

-89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modiﬁcations.

Cleaning the appliance’s interior

Before using the appliance for the ﬁrst time, wash all internal parts with lukewarm water and neutral soap so as to remove the typical «new» smell and then dry thoroughly.

Do not use detergents or abrasive powders as these will damage the ﬁnish.

Door reversibility

Reversing consists of changing the opening direction of the doors, which may be to the right or to the left.

Warning

Before carrying out the operations described below, the appliance should be unplugged.

Right hand door opening

Remove the screws (1), the upper and lower pivots

(2)and the safety washer (4) from the left-hand side of the appliance (Fig. 1). Next remove the door’s top hinge (3-Fig. 2a).

Fig. 1

D561

Fig. 2

D148

Fig. 2a

D562

ZPC 428 D, ZPC 428 DM specifications

The Zanussi ZPC 428 DM and ZPC 428 D are two advanced cooking appliances that exemplify modern kitchen technology and design. These cookers combine functionality with efficiency, making them great additions to any kitchen.

One of the standout features of the Zanussi ZPC 428 series is its dual fuel capability. This allows users to benefit from the precision of a gas hob while enjoying the even cooking results provided by an electric oven. This combination makes meal preparation more versatile, accommodating various cooking methods and preferences.

The ZPC 428 DM and ZPC 428 D both boast a spacious oven with multiple cooking functions, including fan cooking, conventional baking, and grilling. The fan cooking feature ensures that heat is circulated evenly throughout the oven, allowing for consistent results regardless of where dishes are placed. This is particularly beneficial for baking multiple trays of cookies or roasting large cuts of meat.

Another notable characteristic is the presence of a programmable timer. This helpful function enables users to pre-set cooking times, ensuring that meals are cooked to perfection without the need for constant supervision. The included quick heating feature is additionally beneficial for those who are always on the go, as it reduces the time it takes to reach the desired cooking temperature.

Cleaning is made simpler with the Zanussi ZPC 428 series due to its enamel-coated interiors, which resist grime and make post-cooking maintenance less of a chore. The removable oven door also enhances accessibility for thorough cleaning.

When it comes to design, the Zanussi ZPC 428 DM and ZPC 428 D are aesthetically pleasing and integrate well into modern kitchens. Their sleek appearance and high-quality materials give them a premium feel, while practical features ensure they remain user-friendly.

Safety is a priority in the design of both models, with built-in safety valves on the gas burners that automatically cut off the gas supply if the flame is accidentally extinguished. This adds peace of mind for users, especially in busy households.

In summary, the Zanussi ZPC 428 DM and ZPC 428 D combine innovative technology with user-friendly features, making them excellent choices for efficient and effective cooking in the contemporary kitchen. Their versatile functions, easy maintenance, and safety features come together to create a reliable cooking appliance that meets the demands of everyday culinary tasks.