Figure 10. Removing and Installing the Hard-Drive/SSD Backplane (Half-Length)
1. | guide pins (3) | 2. | backplane connector |
3. | 4. |
5.guides (3)
Installing The Hard-Drive/SSD Backplane
1.Remove the blade from the enclosure.
2.Open the blade.
3.Align the guides on the
4.Press down the backplane until the connectors on the backplane and the system board are fully engaged.
5.Install the hard drives/SSDs in their original locations.
6.Close the blade.
7.Install the blade in the enclosure.
36