Garland MCO-GS-10E Timer Resolution Changing, Change the Hertz, To SET Hold Temperature

Page 11

The User Preference Offset is designed to enable the user to adjust the controlling temperature. There are two different styles of controllers used by GARLAND at the present time. They are the Robertshaw COM6000 and COM6700 Series. To determine which of the controllers you are working on, look at the back of the controller and you will see a sticker with a printed number like “PN:100-289-03”, below this number is the controller style number. For example: COMA-6704-GL. This indicates that controller is in the COM6700 Series. Or if the number was “COM- 6000-GA” it would indicate that it is a COM 6000.

COM6000 UPO MODE

 

Entry

 

Exit

UPO - User Preference Offset. Used by the user to adjust the controlling temperature +/- 50º in 1º

increments.

 

 

1.

Set the time digits to 00:00.

1.

Depress the

2.

Set the temperature digits to X10º.

 

Cancel button to

3.

Depress both the Start and Cancel buttons for five seconds.

 

lock-in

TO CHANGE FAHRENHEIT TO CELSIUS (and vise versa)

 

 

1.

Set the time digits to 00:00.

1.

Depress the

2.

Set the temperature digits to X20º.

 

Cancel button to

3.

Depress both the Start and Cancel buttons for five seconds.

 

lock-in.

4.

Rotate either dial to display FFF or CCC in the temperature display

 

 

TIMER RESOLUTION CHANGING

 

 

1.

Set the time digits to 00:00.

1.

Depress the

2.

Set the cook temp to X30º

 

Cancel button to

3.

Depress both the Start and Cancel buttons for five seconds.

 

lock-in.

4.

Rotate either dial to display “HR” or “MN”.

 

 

CHANGE THE HERTZ

 

 

1.

Set the time digits to 00:00.

1.

Depress the

2.

Set the cook temp to X40º

 

Cancel button to

3.

Depress both the Start and Cancel buttons for five seconds.

 

lock-in.

4.

Rotate either dial to display “50” or “60” Hz.

 

 

TO SET HOLD TEMPERATURE

 

 

1.

Set the time digits to 00:00.

1.

Depress the

2.

Set the cook temp to X50º

 

Cancel button to

3.

Depress both the Start and Cancel buttons for five seconds.

 

lock-in.

4.

The word “hold” will now be displayed in the tim e display. Rotate either dial to

 

 

 

set hold temperature.

 

 

TO SET OVEN INTO PULSE MODE

 

 

1.

Set the time digits to 00:00 and temperature digits to 000°.

1.

Depress the

2.

Depress both the Start and Cancel buttons.

 

Cancel button to

3.

Rotate either dial to display “con” for continuous operation or “cyc” for cycling

 

lock-in.

 

fan on & off.

 

 

COM6700 UPO MODE

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Garland Direct ON-SITE Service 1-800-451-1165 General InformationOverview of Operational Sequences Table of ContentsSpecification & Dimensions Common Wire Diagrams Component Access of Functional ComponentsAMT Orifice NAT PRO GAS Convection Oven GAS Specifications Main Pilot TotalDimensions & Specifications Pilot Orifice PRES. W/CInstrumentation Manual Controls MCalibration of Thermostat Weighting Calibration Notes Thermostat OperationElectronic Controls E Robertshaw COM6000 Controller Electronic Control Failure CodesTemp User Preference Offset for the Electronic Controllers Operation of the Temperature FunctionOperation of the Timer Function Operation of the Pulse FunctionChange the Hertz Timer Resolution ChangingTo SET Hold Temperature To SET Oven Into Pulse ModeSecond Stage Main Burner Operation Safety Lockout TimeChain Programming END Start StageYES Spark Across IGNITOR/SENSOR GAP YES Spark Stops When Pilot is LIT?Troubleshooting Ends S86 Checkout StartExamples of Unsatisfactory Pilot Flames Check GroundingCheck Spark Ignition Circuit Control Module Flame Sensor CircuitAppearance Cause Lower Front Component LocationsTop Front Center Right FrontFile Name To Remove Doors from the OvenDisassembly of the Left Door To Reinstall Doors onto Convection OvenInstalling and Adjusting Door Chain Disassembly of the Right Door w/o window Page Convection Oven Motor To Replace or Adjust Door Latch MechanismTo Replace Convection Oven Motor Assembly Drawing Below Assembly Page Common Wire Diagrams Page

MCO-GD-10M, MCO-GS-10E, MCO-GD-10E, MCO-GS-10M specifications

Garland has made a significant mark in the market with its range of high-efficiency heaters, particularly the MCO-GS-10M, MCO-GD-10E, MCO-GS-10E, and MCO-GD-10M models. These advanced heating solutions are designed for various applications where reliability, efficiency, and versatility are essential.

The MCO-GS-10M and MCO-GD-10M models are particularly notable for their robust construction and dual-fuel capability, allowing them to utilize natural gas or propane. This flexibility ensures that users can choose the most cost-effective fuel source, making them ideal for both residential and commercial use. These models are equipped with state-of-the-art ignition systems that guarantee a swift and trouble-free start every time, minimizing downtime.

On the other hand, the MCO-GS-10E and MCO-GD-10E models are electric heaters that offer an environmentally friendly alternative without compromising performance. These units are designed with high-efficiency heating elements that ensure rapid heating while consuming less energy. Furthermore, their sleek and modern design allows them to blend seamlessly into any indoor environment, making them suitable for use in homes, offices, and other professional settings.

All four models incorporate advanced safety features, including automatic shut-off mechanisms to prevent overheating. They are designed with user-friendly controls, allowing operators to easily set the desired temperature and adjust fan speeds based on their specific heating needs.

In terms of durability, Garland has ensured that the exterior of these heaters is constructed from high-grade materials capable of withstanding harsh conditions. This ensures longevity and reduces the need for frequent replacements, providing excellent value for money.

Moreover, the technology embedded within these models, such as multi-stage heating and precise temperature controls, offers an optimal heating experience. They are designed to be energy efficient, helping consumers save on utility bills while still maintaining comfortable ambient temperatures.

Overall, the Garland MCO-GS-10M, MCO-GD-10E, MCO-GS-10E, and MCO-GD-10M units exemplify the perfect blend of innovation, efficiency, and safety. These models cater to a diverse range of heating needs while being environmentally aware, making them an excellent choice for users seeking reliable and effective heating solutions. Whether it's for home use or in a commercial setting, Garland's heaters deliver excellent performance that stands the test of time.
Top Page Image Contents