Hunter Fan 90063, 90064 manual B20, B21, B22 B23, B24, B25

Page 10

B20	F
	F
	2
	1
	F

Install the wiring cover plate. Make sure all wiring connections are inside the box or under the wiring cover plate.

B21

G

Tighten the wiring cover plate screw.

B22 B23

H

Connect 4” duct and vent to the outside. Tape joints.	Connect wiring from the motor to the wiring cover plate.
If ducting does not fit securely, an adapter may need
to be purchased.

B24

H

Reinstall the motor by inserting the tabs and pushing up

into position. Make sure the wires are not pinched

between the motor and the housing.

10

41722_EngS_3.29.03.indd 10

B25

I

Secure the motor by tightening the 2 screws.

41722-01 3/29/2006

3/29/06 10:54:59 PM

Image 10

Contents Read and Save These Instructions Preventative Maintenance Before Installation X5 aRemove the motor/blower from the housing A11 A12 A15 A14A16 A20 A18A19 A22B13 A23B11 B14B18 B15B17 B19B22 B23 B20B21 B24B28 Existing Construction accessible from aboveB27 C11C14 C12C15C16 C17 C21C25 C22C24 C26C29 C30 Existing Construction accessible only from belowC27 C28 D11D15 D16D20 D17D18 D19D23 D24 Attaching the GrilleTrouble Shooting SolutionWarranty Limited WarrantyDesde Í a S t a l a c i ó nPrecaución Antes de la instalación Verifique todos losSpan3.29.06.indd 29/06 110003 PM Construcción nueva fijación a la viga Tire de los alambres por el aliviador de tensiones Encendido Apagado Vaya al paso En la página 38 para Fijar la rejilla B18 B22 B23C11 Ventilador Existente SIN Ventilador Existente Construcción existente accesible desde arribaRecorte una abertura para el alojamiento Apriete los tornillos del aliviador de tensiones 41722-02 3/29/2006 C29 Construcción existente accesible sólo desde abajoSpan3.29.06.indd 29/06 110035 PM 29/06 110039 PM D23 Fijación de la rejillaSolución de problemas SoluciónGarantía Garantía Limitada