Hunter Fan 90064, 90063 manual D17, D18, D20, D19, D21

Page 17

D17

2

1

F

Install the wiring cover plate. Make sure all wiring connections are inside the box or under the wiring cover plate.

D18

G

Tighten the wiring cover plate screw.

				D20
	D19
	D19
	H


				H

	Connect wiring from the motor to the wiring cover plate.			Reinstall the motor by inserting the tabs and pushing up
				into position. Make sure the wires are not pinched between
				the motor and the housing.

D21

I

Secure the motor by tightening the 2 screws.

41722-01 3/29/2006

41722_EngS_3.29.03.indd 17

D22

Turn on the power source.

17

3/29/06 10:55:19 PM

Image 17

Contents Read and Save These Instructions Preventative Maintenance X5 a Before InstallationRemove the motor/blower from the housing A11 A12 A16 A14A15 A19 A18A20 A22B11 A23B13 B14B17 B15B18 B19B21 B20B22 B23 B24B27 Existing Construction accessible from aboveB28 C11C15C16 C12C14 C21 C17C24 C22C25 C26C27 C28 Existing Construction accessible only from belowC29 C30 D11D16 D15D18 D17D20 D19Attaching the Grille D23 D24Solution Trouble ShootingLimited Warranty WarrantyÍ a S t a l a c i ó n DesdePrecaución Verifique todos los Antes de la instalaciónSpan3.29.06.indd 29/06 110003 PM Construcción nueva fijación a la viga Tire de los alambres por el aliviador de tensiones Encendido Apagado Vaya al paso En la página 38 para Fijar la rejilla B18 B23 B22Construcción existente accesible desde arriba C11 Ventilador Existente SIN Ventilador ExistenteRecorte una abertura para el alojamiento Apriete los tornillos del aliviador de tensiones 41722-02 3/29/2006 Construcción existente accesible sólo desde abajo C29Span3.29.06.indd 29/06 110035 PM 29/06 110039 PM Fijación de la rejilla D23Solución Solución de problemasGarantía Limitada Garantía