Hunter Fan 90064, 90063 manual A18, A19, A20, A22

Page 7

A170

Connect 4” duct and vent to the outside. Tape joints. If ducting does not fit securely, an adapter may need to be purchased.

A18

H

Connect wiring from the motor to the wiring cover plate.

A19

H

Reinstall the motor by inserting the tabs and pushing up

into position. Make sure the wires are not pinched

between the motor and the housing.

A20

I

Secure the motor by tightening the 2 screws.

A21

Turn on the power source.

41722-01 3/29/2006

A22

ON

OFF

Test the motor. If the motor does not run, check the plug

connection.

7

41722_EngS_3.29.03.indd 7

3/29/06 10:54:51 PM

Image 7

Contents Read and Save These Instructions Preventative Maintenance X5 a Before InstallationRemove the motor/blower from the housing A11 A12 A15 A14A16 A22 A18A19 A20B14 A23B11 B13B19 B15B17 B18B24 B20B21 B22 B23C11 Existing Construction accessible from aboveB27 B28C14 C12C15C16 C21 C17C26 C22C24 C25D11 Existing Construction accessible only from belowC27 C28 C29 C30D16 D15D19 D17D18 D20Attaching the Grille D23 D24Solution Trouble ShootingLimited Warranty WarrantyÍ a S t a l a c i ó n DesdePrecaución Verifique todos los Antes de la instalaciónSpan3.29.06.indd 29/06 110003 PM Construcción nueva fijación a la viga Tire de los alambres por el aliviador de tensiones Encendido Apagado Vaya al paso En la página 38 para Fijar la rejilla B18 B23 B22Construcción existente accesible desde arriba C11 Ventilador Existente SIN Ventilador ExistenteRecorte una abertura para el alojamiento Apriete los tornillos del aliviador de tensiones 41722-02 3/29/2006 Construcción existente accesible sólo desde abajo C29Span3.29.06.indd 29/06 110035 PM 29/06 110039 PM Fijación de la rejilla D23Solución Solución de problemasGarantía Limitada Garantía