Hunter Fan 90063, 90064 manual C12, C14, C15C16

Page 12

			5”
		7
9”	.
9”	9
	9

Cut out an opening for the housing.

C13

	5/8	5/8
		1/2
	1/2

C12

E

D

Slide the mounting rails into brackets.

C14

Position the correct depth mark at the bottom edge of the

joist based on the thickness of your sheetrock.

Mark position of screws by using holes as a template.

C15C16

1/8" Bit

Drill a hole in the center of each outline.	Insert screws, leaving space between the screw head
	and the joist. Screws are not provided.
12	41722-01 3/29/2006

41722_EngS_3.29.03.indd 12

3/29/06 10:55:05 PM

Image 12

Contents Read and Save These Instructions Preventative Maintenance Before Installation X5 aRemove the motor/blower from the housing A11 A12 A14 A15A16 A18 A19A20 A22A23 B11B13 B14B15 B17B18 B19B20 B21B22 B23 B24Existing Construction accessible from above B27B28 C11C12 C14C15C16 C17 C21C22 C24C25 C26Existing Construction accessible only from below C27 C28C29 C30 D11D15 D16D17 D18D20 D19D23 D24 Attaching the GrilleTrouble Shooting SolutionWarranty Limited WarrantyDesde Í a S t a l a c i ó nPrecaución Antes de la instalación Verifique todos losSpan3.29.06.indd 29/06 110003 PM Construcción nueva fijación a la viga Tire de los alambres por el aliviador de tensiones Encendido Apagado Vaya al paso En la página 38 para Fijar la rejilla B18 B22 B23C11 Ventilador Existente SIN Ventilador Existente Construcción existente accesible desde arribaRecorte una abertura para el alojamiento Apriete los tornillos del aliviador de tensiones 41722-02 3/29/2006 C29 Construcción existente accesible sólo desde abajoSpan3.29.06.indd 29/06 110035 PM 29/06 110039 PM D23 Fijación de la rejillaSolución de problemas SoluciónGarantía Garantía Limitada