I N S T A L L A T I O N
1.PREPARATION
WARNING: • If the range hood is not installed properly, it could become
detached and fall off.
•Ensure that the metal duct does not touch other metal housing materials, otherwise fire or electric shock could result.
This range hood can discharge upward
1 or backward. According to the conditions where the hood is installed, determine whether it will discharge vertically (3¼" × 10" or 7" Round) or horizontally (3¼" × 10" only). For vertical or horizontal discharge, run duct work between the hood location and a roof cap or wall cap. For the best results in either directions, use a minimum number of transitions and elbows. Be sure to attach a roof cap or wall cap to avoid leaking rain in the end.
Use diagrams below, for proper placement of ductwork and electrical cutout in
2 cabinet or wall.
;3¼" × 10" Vertical Ducting
7