Fujioh FSR-3000 installation manual Connecting Power Supply Wires

Page 11

3. CONNECTING POWER SUPPLY WIRES

WARNING: • Electrical wiring should be done by a qualified person(s) in accordance with all-applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury.

•This range hood uses 120V AC. Do not connect to another voltage since fire, electric shock or damage could result.

Remove the nut from the conduit

1 connector at the end of power wiring.

WARNING: Be sure to switch

power OFF at service panel before wiring.

Connect the conduit through the

2 connecting hole of the body using the nut previously removed.

Power Wiring

Conduit

Nut

Conduit

Nut

Range Hood

12

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model FSR-3000 Installation ManualSafety Instructions Page Model Size & DimensionsAccessories Name of PartsRange Hood Location ¼ × 10 Vertical Ducting InstallationPreparation ¼ × 10 Horizontal Ducting Round Vertical Ducting Round Duct Joint Case of 3-1/4×10Horizontal Discharge Case of 3-1/4×10Vertical DischargeCase of 7 Round Vertical Discharge Range Hood Mounting Referring to Size & DimensionsConnecting Power Supply Wires Check Final Assembly and CheckAssembly refer to Preparation 60Hz Circuit Diagram1U030381
Top Page Image Contents