Tangent Audio Quattro MKII manual Language, Factory Reset, Register Clock setup, Backlight

Page 27

<Language>

Allows you to change the display language.

<Factory Reset>

Puts all the settings back to their defaults as they were when they left the factory. If you perform a factory reset on your radio you will lose all your presets and your wireless network connection.

<Register>

This will display a key that can be used to register the radio on the Reciva Customer portal: http://www.reciva.com/

<Clock setup>

Use this option to set the time, to set an alarm and to view the current alarm setting, see “Setting the clock”, “Setting the alarm”.

<Backlight>

Selecting this option will alter the Internet radio’s backlight values.

1.After selecting the ‘Backlight’ menu item, the radio will display its list of three menu modes: ‘Inactive’, ‘Active’ and ‘Standby’. These three states are explained below:

•The radio gets into its ‘inactive’ state when there is no user activity for 30 seconds.

•The ‘active’ state is when there is user activity.

•‘Standby’ is the state when the radio has been turned off.

2.Rotate the TUNE knob to highlight the desired menu mode and press

SELECT.

3.The radio will now display the current backlight value for this menu mode. You can alter this value by rotating the knob to increase or decrease it.

<Wifi Strength>

Use this option to see the signal strength between your Quattro radio and your wireless access point.

30

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Contents Configure menu Configuring ‘My Stuff’Troubleshooting Software licence information Specifications What you need before you can use your Internet radio Internet Radio Quickstart GuideControls AUX Connections12V DC Line outSteps for connecting your radio to your wireless network Power up the radioScan for a wireless network connection Connect to the wireless network Steps for connecting your radio to your wired network Location Choosing a radio station to listen toSearch GenreUsing your radio for tuning into FM stations Changing the volumeReturning to the menu while a station is playing Playing a preset radio station Storing a radio station in a presetSetting the clock Setting the alarm Page Setting the sleep timer Media Player Quickstart Guide Locate the shared audio files using the radioQueuing up albums for playback later Listening to a single shared trackListening to a complete shared album Queuing up tracks for playback laterControlling playback Removing tracks from the queuePlaying tracks in random order Playing tracks in the queue repeatedly Selecting ‘Media Sharing…’ for Windows Media Player Allowing the Radio to Connect Locating and playing media files using the radio and UPnPQueuing up UPnP tracks for playback later Removing tracks from the queue Upgrade Firmware Configure menuChoosing the option you want from the Configure menu Network ConfigLanguage Factory ResetRegister Clock setup Wifi StrengthConfiguring ‘My Stuff’ Configuring ‘My Stations’Registering an account on Reciva’s website Configuring ‘My Streams’ Troubleshooting Software licence information Specifications Item no
Top Page Image Contents