Tangent Audio Quattro MKII manual Steps for connecting your radio to your wireless network

Page 7

Steps for connecting your radio to your wireless network

Step 1 - Power up the radio

Plug the cable from the mains adapter into the socket labelled 12V DC on the back of the radio.

CAUTION: Use only the mains adapter supplied with the radio. Connecting a power supply with a different rating will cause permanent damage to the radio and may be hazardous.

The display on the front of the radio will light up and say:

Tangent

Quattro

Reciva enabled

ARM powered

After a few seconds, this will change to show:

< Scan for networks

>

Step 2 - Scan for a wireless network connection

When the display says <Scan for networks>, press the SELECT button.

(Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.)

The radio will now scan for all available wireless networks and will display:

Scanning

IIIIIIIIIIIIIIIIII

If it can’t find one then the display will say:

No Wireless

Networks Found

If this happens then you will have to get your wireless access point working - see the instructions supplied with it.

When the radio finds your wireless network, it displays the ESSID for the access point on the screen - this is a name that is allocated to the access point by the person who set up the network - for example:

10

Image 7

Contents Page Contents Configuring ‘My Stuff’ Configure menuTroubleshooting Software licence information Specifications What you need before you can use your Internet radio Internet Radio Quickstart GuideControls AUX Connections12V DC Line outPower up the radio Steps for connecting your radio to your wireless networkScan for a wireless network connection Connect to the wireless network Steps for connecting your radio to your wired network Location Choosing a radio station to listen toSearch GenreChanging the volume Using your radio for tuning into FM stationsReturning to the menu while a station is playing Playing a preset radio station Storing a radio station in a presetSetting the clock Setting the alarm Page Setting the sleep timer Media Player Quickstart Guide Locate the shared audio files using the radioQueuing up albums for playback later Listening to a single shared trackListening to a complete shared album Queuing up tracks for playback laterRemoving tracks from the queue Controlling playbackPlaying tracks in random order Playing tracks in the queue repeatedly Selecting ‘Media Sharing…’ for Windows Media Player Allowing the Radio to Connect Locating and playing media files using the radio and UPnPQueuing up UPnP tracks for playback later Removing tracks from the queue Upgrade Firmware Configure menuChoosing the option you want from the Configure menu Network ConfigLanguage Factory ResetRegister Clock setup Wifi StrengthConfiguring ‘My Stations’ Configuring ‘My Stuff’Registering an account on Reciva’s website Configuring ‘My Streams’ Troubleshooting Software licence information Specifications Item no