Tangent Audio Quattro MKII Choosing the option you want from the Configure menu, Version

Page 26

Configure menu

Choosing the option you want from the Configure menu

1.Press the SELECT button.

Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.

2.Turn the TUNE knob until ‘Configure’ is displayed

3.Press the SELECT button.

4.Turn the TUNE knob until the display shows the option you want.

5.Press the SELECT button to choose the option shown on the display. The options are explained below.

<Network Config>

Enables you to scan again for connection to another wireless network, or to manually configure the network parameters. Use this if you take the Internet radio to another building where you want to use it

The Network Config menu also allows you to choose whether or not the Internet radio displays a warning message when its network signal strength is low. You can enable this feature by selecting ‘Signal Warning’ and then selecting ‘Yes’.

<Version>

Displays the versions numbers of the various parts of software and hardware on your Internet radio.

<Upgrade Firmware>

Use this option to download new firmware for the radio from the Reciva portal on the Internet. If there is new firmware available, then the radio will prompt you if you want to download it or not. Note, at this stage, you can press the radio’s BACK button to cancel the radio beginning a firmware upgrade. A Firmware upgrade may take several minutes, so do NOT switch off the power to the radio until the operation is complete otherwise the radio may become permanently damaged.

29

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Page Contents Troubleshooting Software licence information Specifications Configure menuConfiguring ‘My Stuff’ Internet Radio Quickstart Guide What you need before you can use your Internet radioControls Line out Connections12V DC AUXScan for a wireless network connection Steps for connecting your radio to your wireless networkPower up the radio Connect to the wireless network Steps for connecting your radio to your wired network Choosing a radio station to listen to LocationGenre SearchReturning to the menu while a station is playing Using your radio for tuning into FM stationsChanging the volume Storing a radio station in a preset Playing a preset radio stationSetting the clock Setting the alarm Page Setting the sleep timer Locate the shared audio files using the radio Media Player Quickstart GuideQueuing up tracks for playback later Listening to a single shared trackListening to a complete shared album Queuing up albums for playback laterPlaying tracks in random order Controlling playbackRemoving tracks from the queue Playing tracks in the queue repeatedly Selecting ‘Media Sharing…’ for Windows Media Player Locating and playing media files using the radio and UPnP Allowing the Radio to ConnectQueuing up UPnP tracks for playback later Removing tracks from the queue Network Config Configure menuChoosing the option you want from the Configure menu Upgrade FirmwareWifi Strength Factory ResetRegister Clock setup LanguageRegistering an account on Reciva’s website Configuring ‘My Stuff’Configuring ‘My Stations’ Configuring ‘My Streams’ Troubleshooting Software licence information Specifications Item no
Top Page Image Contents