Tangent Audio Quattro MKII manual Setting the alarm

Page 15

<

Set Time / Date

>

8.Press the SELECT button.

Set Time

14:03

9.Turn the TUNE knob until the hour setting is correct, then press the SELECT button.

Set Time

15:03

10.Turn the knob until the minute setting is correct, then press the SELECT button.

Time Set:

15:06

The display says Time Set with the new time shown beneath for 3 seconds, then returns to the radio station display.

Setting the alarm

1.Press the ALARM button. (Note: if you make a mistake at any point, press the BACK button to go back to the previous screen.)

2.Turn the TUNE knob until the display says <Set Alarms>.

<

Set Alarms

>

3.Press the SELECT button. <1 OFF 00:00 Sunday>

4.Turn the knob to swap between <1>,<2>,<3>,<4>,<5> and <Disable all> and press the SELECT button. If you choose <Disable all> then the alarms will be turned off. The display says All Alarms disabled for 3 seconds, then returns to the radio station display.

All Alarms

disabled

5.If you choose one of the numbers between 1 and 5 then the display enables you to set the time for the alarm.

Set Alarm

15:06

6.Turn the TUNE knob until the hour setting is correct, then press the SELECT button.

18

Image 15
Contents Page Contents Configure menu Configuring ‘My Stuff’Troubleshooting Software licence information Specifications What you need before you can use your Internet radio Internet Radio Quickstart GuideControls AUX Connections12V DC Line outSteps for connecting your radio to your wireless network Power up the radioScan for a wireless network connection Connect to the wireless network Steps for connecting your radio to your wired network Location Choosing a radio station to listen toSearch GenreUsing your radio for tuning into FM stations Changing the volumeReturning to the menu while a station is playing Playing a preset radio station Storing a radio station in a presetSetting the clock Setting the alarm Page Setting the sleep timer Media Player Quickstart Guide Locate the shared audio files using the radioQueuing up albums for playback later Listening to a single shared trackListening to a complete shared album Queuing up tracks for playback laterControlling playback Removing tracks from the queuePlaying tracks in random order Playing tracks in the queue repeatedly Selecting ‘Media Sharing…’ for Windows Media Player Allowing the Radio to Connect Locating and playing media files using the radio and UPnPQueuing up UPnP tracks for playback later Removing tracks from the queue Upgrade Firmware Configure menuChoosing the option you want from the Configure menu Network ConfigLanguage Factory ResetRegister Clock setup Wifi StrengthConfiguring ‘My Stuff’ Configuring ‘My Stations’Registering an account on Reciva’s website Configuring ‘My Streams’ Troubleshooting Software licence information Specifications Item no