Zanussi ZDF 501 user manual Fitting under a counter, Levelling

Page 25

Fitting under a counter

By removing the dishwasher’s worktop, you can install it under a close fitting sink unit or a pre-existing top.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

Unscrew the two screws	Push the top backwards	Lift top at the front and
at the rear.	about 1 cm.	remove it.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

Check if the dishwasher	If not, loosen or tighten
is levelled.	the adjustable feet until
	the appliance is
	perfectly levelled.

Image 25

Contents User Manual Dishwasher Content Do not sit or stand on the open door Safety informationAll packaging must be removed before use Control panel and functions Delay start button Salt and rinse aid lightsProgramme in progress light On/Off buttonFunction buttons Cancel the washing programme in progressProgramme selection Starting the washing programmeCancel the delay start in progress Delay startSalt refilling LightAuto washing programme Programme tableAdjust the rinse aid dosage When using tablets that integrate rinse aid and detergentBefore the first use Fill up the salt and rinse aid containerWater softener is factory set at position Setting the water softener manually see tableSetting the water softener electronically see table Use only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Adjusting the dosage of rinse aidFollowing items are not suitable for use in the dishwasher Loading cutlery and dishesIf plates are to be loaded in the upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketNever lift or lower the basket on one side only Unloading the dishwasher Filling with detergentCleaning the filters Cleaning and careNever try to remove the spray arms Prolonged periods of non-operation Environmental concernsDishwasher will not start or stops during operation Something not workingWash results are not satisfactory Consumption values Technical data30 min Eco Rinse and HoldFull load Hints for test institutesWater connection InstallationElectrical connection Levelling Fitting under a counter08705 Service and spare partsCustomer Care Department Major AppliancesThis guarantee does not cover Guarantee conditionsExclusions European guarantee LU4 9QQ Page Page 156999 58/0 Subject to change without notice

ZDF 501 specifications

The Zanussi ZDF 501 is a modern dishwasher that combines sleek design with a range of innovative features, making it an ideal addition to any kitchen. This appliance stands out for its efficiency and performance, catering to households that demand both convenience and effective cleaning.

One of the key features of the Zanussi ZDF 501 is its excellent energy efficiency rating. With a rating that frequently lands in the A++ category, this dishwasher is designed to minimize energy consumption while providing outstanding cleaning results. This not only helps reduce electricity bills but also lowers your overall environmental footprint.

The ZDF 501 boasts a large capacity, able to accommodate up to 13 place settings. This makes it perfect for families or those who entertain regularly, allowing users to clean a significant amount of cutlery, plates, and smaller cooking utensils in one go. The adjustable upper rack provides added versatility, enabling users to manage larger items or optimize space as needed.

This model comes equipped with several wash programs designed to tackle a variety of cleaning tasks. From an intensive wash for heavily soiled pots and pans to a quick wash cycle for lightly soiled items, users can select the most suitable program based on their needs. The eco-friendly mode is also an attractive feature, utilizing less water and energy without sacrificing performance.

Additionally, the Zanussi ZDF 501 includes advanced smart technology. With its Sensorlogic feature, the dishwasher adjusts the water and energy usage based on the load size and dirtiness level. This not only optimizes performance but also enhances overall efficiency.

A notable characteristic is its quiet operation, with noise levels typically around 49 dB. This makes it a great choice for open-plan living spaces or during nighttime use, ensuring that it won't disrupt your household activities or relaxation time.

The clear control panel is user-friendly, featuring a digital display that allows users to monitor the remaining cycle time, while the delay start function provides flexibility for those who prefer to run the dishwasher at a later time.

In summary, the Zanussi ZDF 501 is a stylish and efficient dishwasher that excels in energy savings, capacity, and versatility. Its range of intelligent features and quiet operation makes it a reliable choice for any modern kitchen.