Zanussi ZDF 501 user manual Loading cutlery and dishes

Page 13

Loading cutlery and dishes

●The following items are not suitable for use in the dishwasher:

-Cutlery with wooden, horn, china or mother-of-pearl handles

-Plastic items that are not heat resistant

-Older cutlery with glued parts that are not temperature resistant

-Bonded cutlery items or dishes

-Pewter or copper items

-Lead crystal glass

-Steel items prone to rusting

-Wooden platters

-Items made from synthetic fibres

●When loading the dishwasher, make sure that you:

-Remove all left over food and debris.

-Soften remnants of burnt food in pans

-Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.

-Dishes and items of cutlery must not lie inside one another, or cover each other.

-To avoid damage to glasses, they must not touch.

-Lay small objects in the cutlery basket.

●Plastic items and pans with teflon have a tendency to retain water drops; these items will not dry as well as porcelain and steel items.

IMPORTANT!

Before closing the door, ensure that the spray arms can rotate freely.

Load cutlery.

For best results we recommend you to use the cutlery grid provided (if the size and dimensions of the cutlery allow it.

Place knives and other items of cutlery with sharp points or edges with their handles facing upwards.

Risk of injury!

13

Image 13

Contents User Manual Dishwasher Content Do not sit or stand on the open door Safety informationAll packaging must be removed before use Control panel and functions Delay start button Salt and rinse aid lightsProgramme in progress light On/Off buttonFunction buttons Cancel the washing programme in progressProgramme selection Starting the washing programmeCancel the delay start in progress Delay startSalt refilling LightAuto washing programme Programme tableAdjust the rinse aid dosage When using tablets that integrate rinse aid and detergentBefore the first use Fill up the salt and rinse aid containerWater softener is factory set at position Setting the water softener manually see table Setting the water softener electronically see table Use only special salt suitable for dishwashers Filling with dishwasher saltFilling with rinse aid Adjusting the dosage of rinse aidFollowing items are not suitable for use in the dishwasher Loading cutlery and dishesIf plates are to be loaded in the upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketNever lift or lower the basket on one side only Unloading the dishwasher Filling with detergentCleaning the filters Cleaning and careNever try to remove the spray arms Prolonged periods of non-operation Environmental concernsDishwasher will not start or stops during operation Something not workingWash results are not satisfactory Consumption values Technical data30 min Eco Rinse and HoldFull load Hints for test institutesWater connection InstallationElectrical connection Levelling Fitting under a counter08705 Service and spare partsCustomer Care Department Major AppliancesThis guarantee does not cover Guarantee conditionsExclusions European guarantee LU4 9QQ Page Page 156999 58/0 Subject to change without notice