Zanussi ZDF 501 Control panel and functions, Programme in progress light, On/Off button

Page 4

●Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard.

●All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

WARNING!

For electrical and water connection carefully follow the instructions given in specific paragraphs.

Control panel and functions

Programme in progress light

Digital display

On/Off button

Function and programme selection buttons

Delay start button

Salt and rinse aid lights

	IMPORTANT!		● Press On/Off button, ONLY a programme
			button light is illuminated = last performed
	Always remember that when performing		button light is illuminated = last performed
	Always remember that when performing		programme still set.
	operations such as:		In this case the programme has to be
	- selecting a washing programme,		cancelled (see instructions “Cancel a
	- setting the water softener,		washing programme in progress”).
	- setting the water softener,

the appliance MUST be in setting mode:

●Press On/Off button, ALL programme selection button lights are illuminated = appliance in setting mode.

4

Image 4

Contents User Manual Dishwasher Content Do not sit or stand on the open door Safety informationAll packaging must be removed before use Delay start button Salt and rinse aid lights Control panel and functionsProgramme in progress light On/Off buttonCancel the washing programme in progress Function buttonsProgramme selection Starting the washing programmeDelay start Cancel the delay start in progressSalt refilling LightProgramme table Auto washing programmeWhen using tablets that integrate rinse aid and detergent Adjust the rinse aid dosageBefore the first use Fill up the salt and rinse aid containerSetting the water softener manually see table Water softener is factory set at positionSetting the water softener electronically see table Filling with dishwasher salt Use only special salt suitable for dishwashersAdjusting the dosage of rinse aid Filling with rinse aidLoading cutlery and dishes Following items are not suitable for use in the dishwasherIf plates are to be loaded in the upper basket To move to the higher position proceed as follows Adjusting the height of the upper basketNever lift or lower the basket on one side only Filling with detergent Unloading the dishwasherCleaning the filters Cleaning and careNever try to remove the spray arms Environmental concerns Prolonged periods of non-operationSomething not working Dishwasher will not start or stops during operationWash results are not satisfactory Technical data Consumption values30 min Eco Rinse and HoldHints for test institutes Full loadInstallation Water connectionElectrical connection Fitting under a counter LevellingService and spare parts 08705Customer Care Department Major AppliancesThis guarantee does not cover Guarantee conditionsExclusions European guarantee LU4 9QQ Page Page 156999 58/0 Subject to change without notice