![](/images/new-backgrounds/1088143/881439x1.webp)
The control panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 2 | 3 | 4 | 5 |
| 6 | 7 | 8 | 9 | 10 |
In this fully integrated appliance the controls are located on the top of the door. When selecting a programme, the door needs to be partially opened.
Audible signals have been introduced to help indicate which operations the dishwasher is performing.
Short signal - "Instruction accepted"
When any of the buttons are pressed, a short audible signal informs you that the machine has accepted the instruction given; if no signal is heard when a button is pressed, this means that a programme is already running or that the programme selected does not include this function.
Long signal - "Programme run"
A continuous audible signal lasting about half second, heard only when you close the dishwasher door, informs you that the washing programme is starting.
Intermittent signal - "End of programme"
A short intermittent audible signal informs you that the wash programme has ended.
Intermittent signal - "Alarm"
The machine is fitted with a number of alarm systems to help you to determine the cause of any problems (see "Something not working").
An intermittent audible signal lasting about 15 seconds informs you that an alarm is activated.
To deactivate these audible signals (except the alarm
signal).
Both operations (to deactivate or reactivate the audible signals) must be carried out before selecting/starting a washing programme).
Press both "Programme selector" and "Economy dry" buttons together for about 3 seconds (until you hear an intermittent audible signal lasting about 3 seconds).
After this operation the audible signals are deactivated.
SO256
To reactivate the audible signals
Press both buttons together again for about 3 seconds until an intermittent audible signal informs you that the audible signals are now reactivated.
1. On/Off pushbutton
Press this button to preset the dishwasher to accept settings (selection of a wash programme, economy drying, etc.).
The number corresponding to the last programme selected appears in the digital display; if salt or rinse aid need refilling the corresponding indicator light will illuminate.
When the washing programme has finished, the machine stops automatically (a short intermittent audible signal informs you of this) and three flashing horizontal lines
To switch off the dishwasher at the end of the programme, press this button again.
5 | PCP20UK |