Zanussi ZT 6810 manual Protection against flooding, Symptom Solution

Page 22

Symptom

Solution

The dishes are not clean (poor wash)

The baskets are too full.

 

The dishes have not been arranged properly.

 

The spray arms do not rotate.

 

The spray arms are clogged.

 

The filters are clogged.

 

The filters are not in position.

 

Not enough detergent has been used or it is unsuitable.

 

The detergent is old or has gone hard.

 

The salt container cap is not properly closed.

 

The washing programme selected is too gentle.

 

 

Visible lime deposits or white film on

Check that there is salt and that the salt cap is tight.

the dishes

Ensure the water softener has been adjusted to suit the water

 

hardness in your area.

 

 

The dishes are not quite dry

The rinse aid has run out or too little is being used.

 

 

Protection against flooding

The machine is fitted with a device to protect against flooding

-the device will operate if there are any water leaks in the machine, however it will only operate if the machine is on.

To repair the machine call the Service Force Centre.

22

PSN14UK

Image 22
Contents Dishwasher Contents Important safety information Interest of the environmentDescription of the appliance Control panel On/Off pushbuttonCancel pushbutton Rinse aid refill indicator lightSID indicator light Digital displayBefore use To select a different level proceed as followsFilling with salt To fillFilling with rinse aid Adjusting the doseRinse aid Ensure that the lid is closed after every refillUse of detergent To fill the dishwasher with detergent proceed as followsCompact detergents with enzymes Loading your appliance Using your applianceLower basket Cutlery basket To move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket To lower the basket to the original positionHints and tips To save energyWashing programmes OffOperating sequence At the end of the washing programme Cleaning the central filter Maintenance and cleaningInternal cleaning Cleaning the large filterProlonged periods of non- operation External cleaningFrost precautions Moving the machineSymptom Fault code Solution Something not workingSymptom Solution Protection against floodingService and spare parts 08705European Guarantee Guarantee ConditionsStandard guarantee conditions This guarantee does not coverInstallation instructions Technical specificationsRemove all packaging before positioning the machine Water supply connectionsLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Green and Yellow Earth Blue Neutral Brown Live Electrical connectionProceed as follows To adjust the height proceed as follows Adjusting the height of the applianceBuilding-in Furniture door Mounting the furniture door onto the doorNoise protection Depth