Zanussi ZSF 4112 manual Starting a washing programme, Press the On/Off push button

Page 13

Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

7. End of the washing programme

The dishwasher will automatically stop and the End of cycle phase indicator light will illuminate.

The indicator light of the programme just ended will remain on.

Switch off the dishwasher by pressing the On/Off push button, the On/Off indicator light turns off.

Open the door and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

4. Press the On/Off push button

The On/Off indicator light will come on (setting mode).

5. Setting and starting the programme

Press the push button corresponding to the required programme (see "Washing programmes" chart).

The indicator light corresponding to the programme and the phase indicator lights foreseen for that programme will start blinking.

After about 3 seconds from the last pressure of a push button the programme starts automatically.

Once the programme has started the phase indicator lights will turn off except for the phase under way.

Note: it is possible to select a washing programme also with the door slightly opened.

In this case the start of the programme will occur after the closure of the door. Until this moment it is possible to modify the setting made.

a)Press On/Off push button.

b)Select a washing programme.

c)Close the door.

The programme or the countdown will start automatically after about 3 seconds from the closure of the door.

6. To interrupt or cancel a washing programme in progress

Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.

Attention! Hot steam may escape when the door is opened. Open the door carefully.

To interrupt a washing programme in progress

a)Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

b)Press the On/Off push button (in this case all the indicator lights turn off). Press the On/Off push button again; the programme will start from the point in which it was interrupted.

To cancel a washing programme in progress

To cancel a washing programme in progress, press simultaneously the function push buttons 2 and 3 until all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled.

(If a new washing programme will be selected, check that there is detergent in the detergent dispenser).

8. Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dishwasher Contents Installation Safety instructionsChild safety DisposalDescription of the appliance Indicator light Prior to using for the first timeWater softener ExamplesTo fill Filling with saltRinse aid Adjusting the doseFilling with rinse aid Deactivation/activation of the dosage of rinse aidLoading cutlery and dishes Daily useLower basket Are of limited suitabilityCutlery basket Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsFill with detergent Use of detergentDetergent tablets Different kinds of detergentConcentrated detergent Combi detergentsWashing programmes To interrupt or cancel a washing programme in progress Setting and starting the programmeStarting a washing programme Press the On/Off push buttonCleaning the filters Maintenance and cleaningFrost precautions Prolonged periods of non-operationThere are problems when operating the dishwasher Flashing fault code appearsFault code / malfunction Possible cause Solutions Fault Possible cause SolutionsWash results are not satisfactory Dishes are not cleanDishes are wet and dull Water drops have dried onto glasses and dishesCustomer Care Department Service and Spare PartsStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsFitting under a counter Installation instructionsLevelling Water supply connectionsElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The world’s No.1 choice

ZSF 4112 specifications

The Zanussi ZSF 4112 is an innovative built-in dishwasher designed to meet the needs of modern households while delivering outstanding performance and efficiency. This model blends functionality with style, making it an excellent addition to any kitchen setup.

One of the standout features of the Zanussi ZSF 4112 is its energy efficiency. With an A+ energy rating, this dishwasher is designed to consume less electricity, ultimately saving you money on your utility bills and reducing your environmental footprint. It also offers a low water consumption rate, which is advantageous for sustainability-conscious consumers.

The ZSF 4112 is equipped with multiple wash programs to accommodate various dishwashing needs. Whether you're dealing with heavily soiled pots and pans or delicate glassware, this dishwasher has a program to suit your requirements. The Quick Wash program is especially useful for those times when you’re in a hurry, delivering clean dishes in a fraction of the usual time without compromising on results.

One of the most convenient features of this appliance is its adjustable racks, which allow you to customize the interior space according to your needs. The upper rack can be easily raised or lowered to create room for larger items on the bottom shelf. Moreover, the dishwasher includes a cutlery basket that keeps your utensils organized and provides optimal cleaning performance.

The Zanussi ZSF 4112 also emphasizes quiet operation, making it ideal for open-plan living spaces. Its noise level is impressively low, allowing you to run the dishwasher even during the night without disturbing your household.

Technologically, this model comes with a variety of smart features. The Delay Start option lets you plan your wash cycles around your schedule, allowing the dishwasher to run at a time that is most convenient for you. This means you can take advantage of off-peak electricity rates or ensure that your dishes are cleaned just before dinner.

In terms of build and design, the Zanussi ZSF 4112 boasts a sleek and modern appearance that can seamlessly blend with other kitchen appliances. It features an intuitive control panel, making it easy to navigate through different settings.

In summary, the Zanussi ZSF 4112 is a comprehensive dishwasher that combines efficiency, versatility, and ease of use. With its various wash programs, adjustable racks, and energy-saving capabilities, it stands out as a reliable choice for any busy household looking for top performance in their dishwashing appliance.
Top Page Image Contents