Zanussi ZSF 4112 manual Installation instructions, Fitting under a counter, Levelling

Page 19

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570-

600

820

450

IN04

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyDescription of the appliance Examples Prior to using for the first timeIndicator light Water softenerTo fill Filling with saltDeactivation/activation of the dosage of rinse aid Adjusting the doseRinse aid Filling with rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketTo move to the higher position proceed as follows Adjusting the height of the upper basketCutlery basket Upper basketFill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Press the On/Off push button Setting and starting the programmeTo interrupt or cancel a washing programme in progress Starting a washing programmeProlonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsFault Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsWater drops have dried onto glasses and dishes Dishes are not cleanWash results are not satisfactory Dishes are wet and dullCustomer Care Department Service and Spare PartsExclusions Guarantee ConditionsStandard Guarantee Conditions European GuaranteeWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionGreen and Yellow Earth Blue- Neutral Brown- Live Cup racks position a Hints for test centresPage Page From the Electrolux Group. The world’s No.1 choice

ZSF 4112 specifications

The Zanussi ZSF 4112 is an innovative built-in dishwasher designed to meet the needs of modern households while delivering outstanding performance and efficiency. This model blends functionality with style, making it an excellent addition to any kitchen setup.

One of the standout features of the Zanussi ZSF 4112 is its energy efficiency. With an A+ energy rating, this dishwasher is designed to consume less electricity, ultimately saving you money on your utility bills and reducing your environmental footprint. It also offers a low water consumption rate, which is advantageous for sustainability-conscious consumers.

The ZSF 4112 is equipped with multiple wash programs to accommodate various dishwashing needs. Whether you're dealing with heavily soiled pots and pans or delicate glassware, this dishwasher has a program to suit your requirements. The Quick Wash program is especially useful for those times when you’re in a hurry, delivering clean dishes in a fraction of the usual time without compromising on results.

One of the most convenient features of this appliance is its adjustable racks, which allow you to customize the interior space according to your needs. The upper rack can be easily raised or lowered to create room for larger items on the bottom shelf. Moreover, the dishwasher includes a cutlery basket that keeps your utensils organized and provides optimal cleaning performance.

The Zanussi ZSF 4112 also emphasizes quiet operation, making it ideal for open-plan living spaces. Its noise level is impressively low, allowing you to run the dishwasher even during the night without disturbing your household.

Technologically, this model comes with a variety of smart features. The Delay Start option lets you plan your wash cycles around your schedule, allowing the dishwasher to run at a time that is most convenient for you. This means you can take advantage of off-peak electricity rates or ensure that your dishes are cleaned just before dinner.

In terms of build and design, the Zanussi ZSF 4112 boasts a sleek and modern appearance that can seamlessly blend with other kitchen appliances. It features an intuitive control panel, making it easy to navigate through different settings.

In summary, the Zanussi ZSF 4112 is a comprehensive dishwasher that combines efficiency, versatility, and ease of use. With its various wash programs, adjustable racks, and energy-saving capabilities, it stands out as a reliable choice for any busy household looking for top performance in their dishwashing appliance.
Top Page Image Contents